...jack. Attach the Red to the shortest pin, and the Blue to the medium pin. Remember to slide the jack cover onto the headphone cord before attaching any wires! This works great, I just did
Question about Skull Candy Audio Players & Recorders
...headphone jack that goes into the device broke off. Can the wires be soldered back on? If so I see three colors. Red, Blue, and bare copper. Which one goes where on the jack. Do they sell replacement ...
...headphone connector I have the PXC 250 headphones and I'm reploacing the connector. It's not stereo. There's 3 wires: red, green and copper. which is left, right and ground and any special conditions ...
jack. I have resoldered the wires but only get sound from one channel. There were red and blue strands along with copper wires. which wires should go to which terminals please? See my tip on replacing
...jack to the headphones using these wires? The two copper wires on your headphones are independent grounds for each channel. Twist them together and attach them to the ground cable ( black) of the new ...
...headphone jack broke off. What do I do to replace it. If you want to fix it yourself go to partsexpress.com and buy a new headphone plug. You can go to radio shack, but their headphone plug is very ...
jack and solder the connections. These cords seem to have different colors between manufacturers but start by soldering the green or blue (left) to the tip of the plug, the next ring to the red(right)
headphone. Okay, cut and strip the cord. There should be two copper wires and (on Sony headphones, at least) a red and a green strand. On a new 1/8" jack, there should be three connections. The middle
Question about Shure Audio Players & Recorders
Red...) are cleaned up. If this dont fix Please tell me. Im here to help you Good Luck! Hello, one thing to try if you haven't is to try the headset on another appliance to rule out the headset if you
11 questions posted
Usually answered in minutes!
1,657 Questions
472 Questions
430 Questions
300 Questions
298 Questions