Fellowes DM15C Shredder "work reverse" Questions

...work in reverse only. sounds like you have a sensor problem. is it automatic reversing on jamb? if so sensor is defective, or there is a bind causing sensor to reverse only, a bent shaft could cause ...

work in reverse and not forward. I removed the 6 screws on the bottom thinking that I could take off the top from the bottom and remove any more jammed paper. There must be some kind of locking device

...work. It will run in reverse but when I turn it to forward it run for a second or two than stops. I looked and I can't see anything jamed in it. I got mine to work by running it on reverse for a ...

Infoguard SX100M unit will not shred. Green light comes on. Reverse works fine. The plastic clip in the paper insert slot "clicks" appropriately and there are no obvious heat marks. The unit is < 2 ...

shredder only works in reverse mode The shredder only works in reverse mode; does not work in the normal working mode. jammed

...run in reverse This applies if Reverse is forward, and forward is running in reverse. If someone worked on it they may have reversed the wires from the motor to the board. There are four wires

...CARD IN THE SLOT AND THE SHREDDER IS JAMMED. IT DOESN''T WORK. if you have reverse, run reverse. if you don't have reverse, you will have to disassemble the drive shaft/cutters and clear ...

My Executive Machines EPS 1200X shredder works in reverse, but does not shred. there should be a forward/ reverse switch that is used to unjam paper being shredded. check that if it is automatic then ...

reverse DID work. I opened the thing up, reversed the polarity on the red and black wires on the connector for the main drive motor and VOILA!!! I can use my shredder in manual mode by switching it to

...reverse button held. Can't get the sensor lights to work. Tried overide switch for sensor light. Held in reverse for 1 min. Nothing when I attempt to shred a sheet of paper. Unplug from mains ...