Question about Epson Stylus Office Equipment & Supplies
...the end). Then I unplugged the power cord for a few seconds and then plugged it back in and turned the printer power back on. That worked for me. I think this relates to the life of the waste ink
...power cord so the printer stops. This will allow you to freely move the printhead to the far left out of the way. You now need some ammoniated windex or a similar cleaning solution (try asking your ...
Question about Epson Stylus Office Equipment & Supplies
...power cord and move the printhead all the way to the left side of the printer (out of the way) Take a piece of kitchen paper towel folded about 4 times so it's about the size of the parking pad (the ...
Question about Epson Stylus Office Equipment & Supplies
...power cord then while holding down the POWER STOP and MAINTENANCE buttons simultaneously while replugging the power cord caused a reset to zero on the counter. You will still have to replace the pads ...
Question about Epson Stylus Office Equipment & Supplies
power cord out of the back, or switch it off at the mains. You should now be able to move the print head over to the left by hand out of the way. If it won't move then it's jammed on something and you
...power cord out of the back, or turn the printer off at the mains. You may now carefully move the print head by hand over to the left hand side out of the way. Look inside the print head parking area ...
power cord 8. insert power cord back 9. switch on printer 10. insert cartridges back if that do not work, then maybe really you need to replace absorbent sponge... it is done under warranty and if not
Power Cord 3. At SAME TIME, Press & HOLD Power Key while re-connecting Power cord 4. Release the Power button 5. Press the power button again This will work! Hello, try this: 1. Turn off printer 2
power cord 8. insert power cord back 9. switch on printer 10. insert cartridges back If that do not work, then maybe really you need to replace absorbent sponge... it is done under warranty and if not
Question about Brother Office Equipment & Supplies
power cord 8. insert power cord back 9. switch on printer 10. insert cartridges back if that do not work, then maybe really you need to replace absorbent sponge... it is done under warranty and if not
253 questions posted
Usually answered in minutes!
1,911 Questions
664 Questions
510 Questions
454 Questions
438 Questions