...scanner head inside of the scanner top. There are no spare parts for that level of repair. Opening the scanner top to repair it is likely to let in dust or debris and you won't find much that can be ...
Question about HP LaserJet Office Equipment & Supplies
...next step? Does the scanner head try to move? Look at it closely when you power it on. Look at the belt that pulls the scanner back and forth - is it broken? You may have to have the scanner
...scanner head homes. The printer needs to "see" the two little black 1mm square bumps in the white area. When the scanner head "homes", as it just disappears under the plastic it should move left and ...
...scanner optics dirty causing the scan head to be unable to find home position ( white strip on the underside of the glass). Note cleaning the scanner optics requires technical know how as its fairly ...
Question about HP LaserJet Office Equipment & Supplies
...scanner head and the machine moves the paper over it. The line down the pages is due to debris stuck between the page and the scanner. The ADF panel should open to show you the glass that needs ...
Question about HP LaserJet Office Equipment & Supplies
...head scratching I decided to strip one down. I found the fault to be a thin layer of dust on the laser scanner mirror for the red and yellow images. There are four mirrors in the scanner two of which ...
Question about HP LaserJet Office Equipment & Supplies
...Scanner bulb warming up cycle is stuck and it keeps making the set-up sound. how do you stop it? This worked for me today 8/29/10 A much easier way to clean the mirror. Thanks to: ...
...scanner head starts to move at all when you power up the unit. If the head does not move at all or makes an unusual noise, chances are the unit is complaining that the head is stuck or requires too ...
Question about HP LaserJet Office Equipment & Supplies
scanner cable/ribbon/drive belt is caught on something or been stretched too much and can be replaced at all. Its like at one end its caught and wont move the scanning head being stuck somehow, caught
...scanner head seems to be stuck in the home position and there is a whirring / grinding / clicking noise. try to check the safety lock under the scanner unit.if the lock is in the lock position unlock ...
392 questions posted
Usually answered in minutes!
1,429 Questions
1,001 Questions
724 Questions
663 Questions
593 Questions
