Maytag Neptune MAH5500B Front Load Washer "replace door lock" Questions

...door replaced, did they replace the lock assy also? The control puts power to the wax motor that operates the latch. As the door locks, the latch activates the lock switch that tells the control the ...

...or disconnect power. 2. Check door switch/lock unit. 3. Check the wire harness connections to the door switch/lock unit and Main control board. If the wire harness is ok, replace the door lock

latch is won and will need to be replaced. replace door strike and door inter lock Make sure the door has not dropped, if this is the case you can bend it up. Check micro switch in door lock mechanism

...Check the wire connections in harness leading from machine control board to door lock mechanism Check solenoid and door lock enable switch in door lock mechanism. Replace responsible component.. ...

...on) all the way and the drum pushes the door open even more. It seems as if the lock in NOT working properly. Try replacing the door seal. If that doesn't solve it then also replace the door

door lock code. open the soap dispenser door, and find the thin flourescent green, or bright red color nylon cord located in the front left or right areas of the dispenser area, this will allow you to

...replace the lock mechanism module? If the interlock isn't working it may not allow the machine to start. If you can open the door when it should be locked it's probably a faulty ...

...55 to 60 dollars tops. It is a good rule to replace the door lock hoop assembly along with the door lock latch assembly at the same time. make sure the alignment it correct during the

...1.Check wire connections in harness leading from machine control board to door lock mechanism. 2.Check solenoid and door lock enable switch in door lock mechanism. 3.Replace responsible

...1.Check wire connections in harness leading from machine control board to door lock mechanism.2.Check solenoid and door lock enable switch in door lock mechanism. 3.Replace responsible