Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum "remove top cover" Questions

Ad

Question about Vacuums

3 Answers

...remove the top cover of the vacuum so you can access the compartment to put the belt on. The whole top part of this vacuum comes off. If you look above the part where black plate was, there are two ...

Ad

will need to remove. Then flip the power nozzle over and insert a screwdriver between the base and top cover on the left and right sides to release the catch to remove the top cover to get to the belt

Ad

...top off but do not know where to slip it free. Turn the machine over (with the handle released). Remove the 4 screws (2 on each end of the cover over the brush). Remove the cover. There are 2 screws, ...

Question about Hoover Vacuums

1 Answer

...remove the top cover so I can reattach the cable but I can figure out how to remove the cover from the underside: 1. remove 4 screws holding agitator cover in place 2. remove 2 screws (black screws) ...

...remove the top cover of the vacuum so you can access the compartment to put the belt on. The whole top part of this vacuum comes off. If you look above the part where black plate was, there are two ...

remove the top cover. OR 2 tabs at the back of the unit near the screws to remove the top cover. 2) and this is the more common powerhead... remove the light cover for the powerhead by pressing at the

Question about VAX Appliances Vacuums

1 Answer

how do i change the belt on my Vax V-015 06w46 Remove the two screws from the top cover, remove top to expose belt & replace. Replace top cover.

Question about Eureka Vacuums

2 Answers

...remove the bottom plate from the vacuum. Instead, think of it as removing the top part (the "hood" or "cowl") from the bottom. LIFT that top off after removing the screws, don't try to pull the ...

...remove the top cover on your Hoover. The repair was written for a different problem then one you're experiencing, but you can follow along step by step to see how you can remove the top cover. If you ...

Question about Vacuums

1 Answer

...Remove the top or bottom cover of the power nozzle/base of the vacuum. The screws will be on either the top or bottom of the base. Remove these screws to gain access to the brushroll. Remove the ...

Not finding what you are looking for?
Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum Logo

577 questions posted

Ask a Question

Usually answered in minutes!

Top Hoover Vacuums Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Brad Brown

Level 3 Expert

19187 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Hoover Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...