Brother PT-65 Personal P-Touch Electronic Labeling System Printer "adjust tape" Questions

...tape. How do you adjust? You can't adjust the lead since it is just the tape from the printhead to the cutter, the best way to save is to print several labels without cutting and use scissors to cut ...

...tape to adjust the feed on the tape, but it doesn't seem to do anything. What should I do? This is a duplicate post, click on the following like for the original: ...

...Have tried several different cartridges with the same result. ??????? thanks do a upper mech.adjustment how to video on ...

...had to adjust the paper tray internal dividers. 3 You did'nt take the brown tape off the paper tray cover. SOLUTION - remove brown tape, and all will be well (seen this before, this printer +

...Specific needs include parts listing. Any one have any ideas? The unit is not keeping the band adjustment on the tape, Have to set each case by hand auto adjusting not working. Problem appears

...tape from inside paper tray 3. Remove the spacer from inside the print cartridge area. Load all paper trays. Pull the paper trays completely out of the printer. Press the blue tab on the rear paper ...

...adjust the character size to the largest possible size. Release the "Code" to apply the setting. If you have the correct size tape installed and still get the error message, please try removing the ...

...reinstall the printer. yes remove all of the software and re install. make sure you go through the adjustment ...

...adjust the pick up rubber at paper feedr mechanic. Add double tape ( 1 mm, soft) below top rubber. I have done it, and printer can grab/feed paper up to 350 grams. Do not buy ordinary papers for ...

...printing. Default size is A4 If the blue guide in the back of the tray (called the length plate adjuster) is broken or dislodged, the machine may not recognize what size paper is installed. When ...