Hotpoint Ultima WF860 Front Load Washer "fix f05 fault" Questions

f05 is normally a fault cause by the pressure switch - often caused by a blockage in the exit hose of the washer. if the water cannot leave the washer in time the f05 will come up because the pressure

...fix it myself eg clean filter etc Thanks Hi. F05 means that the pressure switch shows full all the time: F05 - Pressure switch jammed on full The fault is usually fixed repairing or replacing the ...

fix this please as I havent enough money for a newone yet. many thanks x Hi, The link below is a user manual for a hotpoint ultima wf860 and below that are the error codes, I wish you all the best....

f05 lights 2&4, pressure sw stuck on full f06 lights 2&3, N/A? f07 lights 2&3&4 heater relay f08 light 1. heater relay f09 lights 1&4 eprom/setup error f10 lights 1&3, pressure

...F05 fault show which I fixed by removing 1.45 and a couple of hairclips from the drain pump filter. The drum was still full of water before I drained it out and cleared the filter. On restarting the ...

...f05 .how can i fix Hi from retired Englishman in SW France, Indesit (Hotpoint, Ariston) 'F05' refers to a 'pump blockage'. I would gently suggest as a first step that you clean the ...

fix my hotpoint washing machine showing an error code of f05 F-05 Error Message The fault is associated with drain out (pump blocked or restricted in some way), pressure switch is jammed on empty or a

...fix an error 5 fault. Hi from retired Englishman in SW France, In general Hoover's 'F05' refers to an NTC failure.ã?? 'NTC' stands for 'Negative Temperature ...

...fix drain / spin problem after overloading in wash...? After washing with too many towels the machine refuses to drain / spin unless there is little or no load ( i.e. will work with two towels - no ...

fix f-05 error Error F05 on some Hotpoint washing machines means the pressure switch has "jammed" on, so the machine thinks it's full of water and refuses to spin. It may indeed be full of water - but