Question about HP LaserJet Office Equipment & Supplies
LaserJet 5550dtn Printer: blows mains fuse and power supply board fuse and b... Blows mains fuse and power supply board fuse and blows power transistor on fuser power supply The fuse blows all time on
...ink could definitely be the problem thats prompting the error. To begin troubleshooting print the supply status page and confirm the state of the various supplies. Follow the steps below: Supplies ...
Question about HP LaserJet Office Equipment & Supplies
says "replace supply using black only" yet all says "replace supply using black only" yet all colors have been replaced Refix connector J127 on dc, clean the supply memory contact,switch on ...
Question about HP LaserJet Office Equipment & Supplies
...Could this be the problem? When the printer says replace supplies, it means that u have more than 1 supply to replace. if you print a supplies status page it will tell you which supplies need to be ...
...58.04 could you please help thanks Hi, Solution or Workaround: NOTE: Replace the low voltage power supply before replacing the fuser or fuser power supply. A firmware upgrade is available on ...
Question about HP LaserJet Office Equipment & Supplies
power supply hp 1020 lasserjet printer I have a hp 1020 for us voltage 110v. and by mistake i've plugged ti in 220 V. Any parts and/or complete power supply for 220 V I would deeply appreciate ann ...
supply memory error Remove cartridge, observe a small chip mounted on cartridge shell..This chip calculates the approximate toner levels, once its reached "Zero" printer says cartridge empty/low ...
Question about HP LaserJet Office Equipment & Supplies
...toner that got depleted. Here the message being displayed indicate that one of the color Toner supply need to be replaced as it got depleted and currently the printer is printing in Black and ...
Question about HP LaserJet Office Equipment & Supplies
HP 8150DN I got 50.1 Error message so I replace low voltage power supply and know I get 51.1 error message now Yes, 50.1 refers to the fuser, and that is very easily replaceable. (no tools) However, ...
bad flash burn power cycle sounds like a short across the mains input on the power supply/ or triacs shorted out on fuser driver pwb, before replacing the power supply (needed) you may also want to ...
1,644 questions posted
Usually answered in minutes!
1,001 Questions
724 Questions
663 Questions
593 Questions
492 Questions