Canon DR-9080C Path-Through Scanner "cleaning pickup roller" Questions

...pickup roller, retard roller and other rollers in the scanner. One can rotate the inner rollers and clean totally, not just waht is seeable area. If the rubber is worn out, it must be replaced. TRy a ...

...roller area. Error message states "jam" clear jam and continue scanning" Clean the rubber rollers (pickup and ******) with a damp cloth, loosen the papers to be scanned. Clean all the rollers in the ...

paper will not feed. the lift tray does work. 1.5 to 2 inches of the top of the paper feeds before it stops. when i used count only still get the same problem with A01 is pickup error. Clean the paper

...cleaning Pickup Rollers be careful with handling delicate plastic moldings. After a good cleaning Test Unit. Now left ADF unit back as to service and power off a minute or 2. This should reset and ...

...Cleaning the rollers and changing the paper pickup pad seemed to fix it, but now the problem seems more severe. Are there parts available for this scanner or a service manual? The scanner is not ...

...pickup, separatory, brake roller) but still the jam persit. can anyone assit me with a solution. regards, Engr. Marcus. Hello Marcus, In Fujitsu fi-5900c scanner, Error 05a refers to JAM1 Sensor ...

...pickup rollers for every 250,000 pages and check other rollers for every 500,000 pages. In case you have been scanning documents with quite a good amount of dust, you may need to check at an earlier ...

Scanner pulls a couple of pages thru and then stops, but, sounds like it is still running and never pulls the rest thru clean pickup rollers & paper path

...pickup roller in the middle of the scanner if you open the front flap, remove theat pickup roller and clean with some computer foam cleaner and a lint free cloth or a screen wipe and reboot the ...

...pickup and the feed rollers push the paper towards the scanning module, while the retard roller initially (in the bottom) pushes it outside. Incase there is a second sheet, it will be pushed out and ...