Samsung HLP4663W 46" Rear Projection HDTV "color tv weird" Questions

...tv started making a loud noise replace the color wheel p/n BP96-00674A Your color wheel has failed, Have the color wheel replaced. The noise is from the bearing in the color wheel. ...

tv out from the wall, cleaned it up (thought that might help). Now the picture comes on for about 2 minutes, then the screen gets all screwy with lots of colors. When I try to turn the set off, it won

TV's color went all weird and I couldn't shut the set off with it's controls (remote or the button on front). The set is only 3 years old and is a Samsung HLP4663W. Is it the color wheel like somebody

TV WITH NO PICTURE??? NOT SURE WHAT TO DO ??? Replace the lamp to start. If that doesn't solve it then it might be the color wheel. You can't do that yourself. Sure you can do the color wheel yourself

...tv off then back on and the humming noise was loud the bulb was on then went off after a15 sec. Took the bulb out and it looks normal. Please tell me its not the color wheel because that sounds ...

...be used or one each should be used? The TV turns on for half a min. with weird colors(red & green) and then turns itself off. Thanks in advance. Rylee Smith STK-392-180s these are the best.Replace ...

...tv, you should be able to see the light from the bulb, if the bulb isn't working no light. I had this happen to my 5085w and it was the color wheel that shattered. Thank god for having the warranty ...

tv can be turned back on but will turn back off after only a few minutes. What needs replacement? Something is overheating or you've got leaking capacitors somewhere. I'd start with the ballast board.

...tv is projecting some weird colors. the picture is barely coming thorough and all the colors have been replaced with bright orange, green and pink. anyone have any ideas what that may be? need to ...

...tv slowly started going out and began making a weird sound. Kind of like an internal fan was turning on and off. The power on button has "Timer," "Lamp," and "Standby/Temp" flashing. What does that ...