Kenmore 22422 Top Load Washer "drive coupler" Questions

...drive coupler, ie. metal parts as the standard under engineered plastic parts continue to break too easyly and often. Also parts numbers for same would be much appreciated. Many thanks Bill. Hi, This ...

...drive motor in place. The coupler consists of two plastic pieces with three prongs (one piece is on the drive motor, one on the transmission) with a rubber bushing in between. I don't know what your ...

...drive coupler is missing the fingers or the coupler itself has come apart. The replacement part is under $10.00 retail but does not include shipping or tax. Here is a video on how to replace the ...

...coupler has metal sleeve and hard to get on drive shaft, may not be fully seated. okay you say coupler was broken, make sure coupler is on properly, and make sure your pump is clear of debri, sounds ...

...drive beltless model with a coupler mounted between the motor and transmission. Over time that coupler can break causing the tub not to spin. If the coupler is ok then the transmission itself or the ...

...drive coupler. if you can here the motor run and the machine will drain water then 99.9% it will be the drive coupler. This coupler is behind the motor and is what conects the motor with the ...

...Drive Coupler My washer quit spinning. I checked the coupler and it was intact with no problems. What could it be. One of the largest problems with this washer has been the lidswitch If you drive ...

drive coupler a year ago. The Drive coupler shaft appears to be worn but doesn't look like it's slipping inside the coupler. Noise not consistent with noises being reported where a new transmission is

...drive which means the transmission that drives the washer drum to agitate it directly mounted to it. Between the two items is a coupler. That coupler has shear pins which have sheared off causing the ...