...bottom agitator and line up the two aliment ear's on bottom agitator and use exstention to push top agitator down on bottom agitator.place agitator back on transmition shaft and replace 1/2 ...
...Bottom part of agitator works but top part no longer moves with the bottom part. It dosent pull the clothes down to the bottom any more. Kenmore Series 80 Super Capacity Plus Quiet Pak Model ...
agitator: bottom moves, top does not I've got a Kenmore series 80 washer. Everything works fine except the top part of the agitator, that cycles the clothes around, doesn't move. The bottom part moves
top agitator will not turn bottom agitator turns top agitator will not turn bottom one half will work
...bottom half of the agitator, either direction, the agitator turns an inch then catches and turns the basket with it. Seems like more than a coupler, transmission? Could be Drive coupling, Clutch dogs ...
...driver over the head of the screw. Turn the screw counterclockwise to remove it.Grab the bottom of the agitator with both hands. Pull the agitator from the bottom of the washtub. Nut driver, ...
...Bottom agitator turns, vertical agitator does not. If the bottom agitates and not the top, the problem is likely the 4 "agitator dogs" designed to allow the top agitator to turn only one way. This ...
bottom of the agitator and remove the agitator and place it on the floor,put a foot on both sides of the bottom of the agitator,next you nead to grab the top of the agitator and pull up and remove the
...bottom agitator. Pull the cam that holds the agitator dog ears from the top agitator. Lay the cam on its top and install the agitator dog ears on their slots. Hold the cam on one hand and the top ...
...bottom of the agitator turns but not the top If the bottom agitates and not the top, the problem is likely the 4 "agitator dogs" designed to allow the top agitator to turn only one way. This assumes ...
1,338 questions posted
Usually answered in minutes!
874 Questions
371 Questions
398 Questions
323 Questions
255 Questions