Emerson MW8102SS 1100 Watts Microwave Oven "condensation door" Questions

freezer has ice in it and the fridge isn't cooling Hello Cass, being that you have a top mount, the vent in the freezer is what circulates air down to the Fresh Food section, making it cool. Here are ...

Condensation marks on microwave door I have a GE JVM1842BD over the range microwave. Condensation from range top cooking has left marks between the glass panels on the door. I would like to take the ...

...Condensation getting within the glass door this as already been replaced by your Baumatic Engineer yesterday and it is still happening. Clearly this condensation should remain inside the microwave ...

Unit starts running when door is closed and doesn't stop until you open the door. This is without any settings entered. Check the door interlock switches and condensation on the control panel.

...door. Condensation has developed between the glass on the door There is a small vent hole at the bottom of your oven door that is made to allow you to reach a brush up to clean the glass.. It sounds ...

...adhesive cover either having been removed or missing. It covers the perforated door inner and stops condensation and food particles from getting inside the door cavity where is cannot be

...door. After use I flatten it out by hand and dry off the condensation. Is this a normal condition? Is this safe or are microwaves leaking? The model number is JES2150MR1SA. Why not REMOVE the ...

double door fridge freezer not cooling down heating the panel between the doors Hi and welcome to FixYa, I am Kelly The symptom you describes it that of a condenser fan not running. Open the ...

...plate separating the interior refrig lights from the door. The condensation tracks along the door and drips on the floor below. Any suggestions on fixing this problem? Thanks. replace the door ...

...door interlock switches is not switching properly or there is a condensation problem on the sensor control panel, either can cause the turntable/light/oven to come on even though the "Start" button ...