I have a Lexibook Meteo Clock SM940 (light turquoise blue and silver). It has 1 remote control outdoor sensor and an indoor base sensor/clock. Batteries have run down and needs resetting - only I cannot find the manual. Please can anyone point me to either an online manual (I have searched with no luck) or could find the time to walk me through a reset. Many thanks.
If its the same as the sm1960 then try this put new batts in.The house code should flash usually code 1 for 8 sec. If you haven't changed it press c/f then set. Then on the main unithold CHN for 3 sec. As it pics up the signal it should beep after 3 mins it finishes learning and all is set. Hope this helps.
Make it 3
Lexibook meteo book sm1960
i have a problem with my rain gauge, i have tried new batteries and waited an hour for it to set itself and it still reads 000 in inches (accumulated 000 / today 000/last hour 000/yesterday .
tried reset button on rain gauge sill does not work/ **** also does not work.
do you think the rain gauge is at fault
yours faithfully [email protected]
5,162 views
Usually answered in minutes!
i have exactly the same problem too!!!
I have a Lexibook Meteo Clock with external sensor and internal display unit. Seems to be working okay but need instructions to use other functions. Can anyone tell me where I can get a copy of instructions.
Many thanks
Chris
×