2007 BMW 525xi Sedan Logo

Related Topics:

Posted on Dec 13, 2017

I have no dashboard lights at all while car is running. headlamps work interior lights work and so do blinkers and horn, but no display on dash or on board screen. unable to tell my speed or anything els. also key must be inside ignition in order to turn on. will not push to start without it. PLEASE HELP! Thank You!

5 Related Answers

Anonymous

  • 77 Answers
  • Posted on Oct 19, 2008

SOURCE: My 2004 530i won't start.

If you hear a mechanical hum then its either something with the starter or the battery. Charge your battery and see if its just a little too weak to turn the engine over. If that doesnt fix it, then you might have to replace the starter. Unless there is a serious mechanical issue, your engine shouldnt be the reason the starter can't get it to turn over.

Ad

Anonymous

  • 20 Answers
  • Posted on Nov 28, 2008

SOURCE: DASHBOARD RADIATOR INDICATOR LIGHT COMES ON WHEN ENGINE IS COLD

you might need to get the water level sensor checked, it may be faulty

onyeredson

Paul W

  • 404 Answers
  • Posted on Jan 15, 2009

SOURCE: my bmw 528I WON'T START AND WON'T JUMP START

Hi Lisa!
This possibly is a immobilizer fault and I would be looking at the Fob/Zapper. The way the immobilizer works is to disable the starter and ignition system.
These fobs have batteries so try replacing them, if you still have the same grief it may need re-coding.
Phone or pop into your local BMW dealer with the Log book/title and ask for their assistance, It shouldn't be expensive unless the vehicle needs to towed/trailered but I'm sure a Girley smile should persuade someone to visit you at home to code the fob to the car.
Hope this FixYa's problem!
Paul 'W'
Onyer~EDson(:0) {#><U.K.

Anonymous

  • 1 Answer
  • Posted on Mar 13, 2010

SOURCE: my BMW 325CI will not start. The engine doesn't even turn overl

i changed the notor on my 2001 bmw 325ci and now the car wont start. the check engine light does not come on at all

Anonymous

  • 1 Answer
  • Posted on Nov 16, 2010

SOURCE: 1995 BMW 525i. Car will not start or turn over.

I had the same problem, after having the car towed to four Seasons, it was discovered that the electrical portion of the ignition switch was defective. Works like a charm. Part number 61 32 8 356 026 Hope this will help.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Entire dashboard lights won't work

buy it used like this or just failed now 30 years later? called out of the blue failed?
name all lamps in the dash that fail there are many
we can not guess them all.
the dash has piles of cluster lamps. (errors) and has background lamps that are DIMMER controlled.
dashboards have many lamps even the shift lever does.

  1. car starts and riuns good
  2. HL work key on and off, headlamps
  3. park ing lamps work
  4. dome lamp work (door opens domes glow)
  5. cluster error lamps work or not.
  6. cluster back ground dimmers work or not.
  7. AC panel dead. lamps yes.
  8. the car has 2 or more fuse boxs, you do know that riight
  9. all facts matter above to fast accurate diagnosis. (I give up)
  10. this car had option AUTO lamps , got that?
F13 ,IP box is fuse that can blow. is park feed (HL) to dash
and via the DIMMER. and also glows Illumination on AC panel
THE AC active lamp is a whole other matter.
if the DIMMER works on high but not below that is a BAD dimmer control, for sure)

IP fuse F6 is for AutO Lamps OPTED CARS.


THIS MAKES NO SENSE
I the dimmer switch turn the interior light on still so I'm assuming it's still good
IF DIMMER FAILS FAILS ALL MODES THE FUSE IS BLOWN
IF DIMMER FAILS ONLY OFF HIGH THE DIMMER ITSELF IS BAD.
IT HAS ONLY 2 PINS ON IT.
HOT WITH PARK OR HL ON.
THIS PATH IS DASH AND CLUSTER ILLUMINATION FEED
OR BACKGROUND LAMPS, ONLY, FOR NIGHT DRIVING.

dimmer-undefined-undefined-0.jpg
1helpful
1answer

Would a battery have enough juice to run blinkers, horn, but just cut out when trying to start

yes the accessories dont use that much amperage as a starter will try boosting and have battery tested unless you know what had drained battery
0helpful
1answer

1999 oldsmobile 88 headlights wont shut off

Headlamp relay contacts could be stuck together causing the headlamps staying on , or the lamp control module is bad .
0helpful
1answer

Pontiac sunfire interior lights, horn and blinkers do not work

They are talking about the body control module, but I'm not sure they are right. The horn does not need the bcm to work. See diagram below. The horn relay is energized by the horn switch on the steering wheel. The switch also signals the bcm, but that is not used to power the horn.

0996b43f80241a74-jnh1p0frnkt3q2fbcpfimq4v-3-0.gif
The turn signal does not use the bcm at all. The problem there may be the switch or the wire. See diagram below.



0996b43f80245517-jnh1p0frnkt3q2fbcpfimq4v-3-2.gif


The instrument lights DO REQUIRE the bcm, but can be rewired to bypass the bcm. The gray wire from the bcm in the diagram below powers the instrument lights. You can cut the gray wire and splice it to the brown wire from the multi function switch. Find the brown wire coming out the bottom of the steering column, skin some insulation off the wire and verify it has 12 volts when the parking lights are on. Do not cut the brown wire--just attach the gray wire to it. You will not be able to dim the lights, but they will come on.



0996b43f80241223-jnh1p0frnkt3q2fbcpfimq4v-3-5.gif
0helpful
1answer

I have a 1990 Mercury Cougar. Several problems...Blinkers, hazards, horn, and break lights are not working. However the break light in the back window comes on when the break is pressed. Checked fused and...

I am unaware of what a "CO" display is.
Now with the blinkers, hazard, horn and brake lights not working that may be the multi funtion switch (blinker switch) that is located inside the column (where the blinker lever attaches).
Obviously the blinker, hazard and horn will all work off of something in the column. Brake lights, you may think a switch on the pedal.

the brake lights do work with that switch but when you have the kind of tail lights where a turn signal light shares the same bulb as a brake light, the brake light is cancelled for the turn signal by running through the multi function switch inside the column.
The third brake light does not blink so its not on that same circuit.
1helpful
1answer

I just bought a 2000 Saturn SL 4-dr sedan. It's in great shape, but the horn doesn't work and the dashboard light don't work. Is this a simple fix with replacing the fuses or dash light or is it a little...

Check fuse for horn and for dash lights. If the interior lights work then suspect dimmer switch for the dash lights. If you press the horn button do you hear a click under the hood or inside the car? If you do not then the fuse is blown and if the fuse is good then the relay may be suspected bad. If the fuse is good and the relay clicks then suspect the horn to be bad. If fuse is blown and you put a new one in and you push the horn and the fuse blows again, then disconnect the horn before replacing the fuse again. Then push the horn button and see if you hear the relay click if you hear a click the the horn is bad or wiring butmost likely the horn. If you have the horn unplugged and the fuse is good and you push thee horn button and no relay click suspect the horn button to be bad. Hope this helps.
1helpful
1answer

Rear tail lights won't go on

sounds like dampness is getting in somewhere around the dash board and is causing a short.when it heats up it dries out
Not finding what you are looking for?

95 views

Ask a Question

Usually answered in minutes!

Top BMW Experts

vince

Level 3 Expert

2530 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

old marine
old marine

Level 3 Expert

2426 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...