THE CAR STARTED BY BURNING EARTH CABLE FROM BATTRY WHICH I THINK WAS WEAK AND LOOSE CONNECTION TO TERMINAL AFTER THAT CAR IS MISFIRING CALLED AN AUTO ELECTRICIAN WHICH CHECKED AND CONFIRMED THAT IT IS IGNITION CONTROL MODULE WHICH SEATS ON INLET MAINFOLD THERE NO PULSE COMING TO THESE PARTICULAR COILS SEND THE MODULE TO A CERTAIN ELECTRONICAL CHAP AND SAID THE MODULE IS OK ENDED UP SENDING UP COMPUTER BOX STILL ACCORDING TO THIS GUY ITS OK HE CHECKED WIRING AND SAID THEY ARE FINE THE AUTO ELECTRICIAN GAVE UP NOW M DOOMED IVE ORDERD PICK UP SENSOR TO CHECK PLIZ HELP
SOURCE: 1988 Isuzu 4x4 pickuno spark coming out of ignition coil going to
Take it down to most any parts store, they can test if if they advertise module testing. Check the coil and see if there is between any of the contacts. They can probably test the coil too. If you have a repair manual for the truck it can tell you what contacts on the coil should have a connection and how much resistance there should be between them.
SOURCE: locate ignition module on 1999 rodeo,3.2L V6 with coils on plug
I do believe it is built into the ecm
SOURCE: my 96 Isuzu rodeo won't start and key is stuck in ignition
either that or the ignition switch itself is binding up
Testimonial: "Thank you very much. That should do the trick"
SOURCE: 2004 isuzu rodeo 3.5 will not start no codes was
throw you boy racer scanner away ,this vehicle cannot be read ,it is one of the first with encrypted software ,dealer only
SOURCE: 1999 isuzu rodeo is misfiring aome of the
when a coil goes out the other ones are usually right behind the one that failed ive seen them go out as fast as going around the block luckly the costumer was right there when it happened and he had us replace all eight of them.
140 views
Usually answered in minutes!
×