Power windows 1999 isuzu rodeo power windows drivers door window wont roll up or down plus only right rear window will roll up all other windows will work from their window switch
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The power windows on your vehicle are controlled by an electronic control module , as are the power mirrors !
Power Window System Components
The power window system consists of the following components:
• Driver door module (DDM)
• Passenger door module (PDM)
• Body control module (BCM)
• LR power window switch
• RR power window switch
• Window up and window down relays in each of the rear passenger window switches
• Window lockout switch
• Reversible power window motors in each of the doors (circuit breaker protected)
• LT DOOR CB 25A (System power for left rear window)
• RT DOOR CB 25A (System power for right rear window)
Your best bet , take your vehicle to a qualified repair shop.
First check your fuse panel. Other than that...Perhaps moisture has gotten in the door panel and messed with the connection. I would take the panel off and investigate..make sure everything is plugged in.
ok do you have one good switch for the pass front and both rears.....in other words do you have at least one of those 3 windows that work normal????if you do remove that switch and connect it to the other windows and check for normality in operation...if it works fine at the switch then the new switch you have is faulty
Circuit board blew in driver door with window down and can't find the fuse
Drivers side back seat window won't roll up
×