- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Test the MASTER switch at the drivers side. It seems to be a "wiring problem with the Master switch. The master switch is the switch that controls ALL the cars windows.
The passenger window switch gets both power and ground from the master switch. You have replaced the passenger side switch and it still had the same result and if the wiring is good from the master switch to the passenger side switch, then the only thing left would be the power window master switch. Check all wiring of the Master switch. That's the only thing that's left to do.
If you have a multimeter you can go to the underside of the master panel in the drivers door and independently check the switches for voltage or with no power to the switch assembly check for continuity. Good place to start. If you get continuity to through the switch then you need to check power to the window actuators in the doors.
First check your fuse panel. Other than that...Perhaps moisture has gotten in the door panel and messed with the connection. I would take the panel off and investigate..make sure everything is plugged in.
the master switch is bad sad to say....they suffer greatly from manufacture defects....you can try to exchange it or find a new one
i went through 3 new ones to get a good one....i know it is expensive but the dealer may be your best bet, you can try it in the parking lot and the parts guy can watch you install it....then they have no choice but to honor the new part warranty if the new one is defective also....thanks
ok do you have one good switch for the pass front and both rears.....in other words do you have at least one of those 3 windows that work normal????if you do remove that switch and connect it to the other windows and check for normality in operation...if it works fine at the switch then the new switch you have is faulty