BEARINGS WORN IN GEARBOX

Check out the link. Winter/ Snow/ Sport or gearbox fluid change. Get it checked for DTC codes.

https://www.google.com/search?q=Peugeot+206.+gear+light+indicators+on+dashboard+to+be+blinking

..

Worn synchromesh on the 1st and 2nd gear cluster...........New or reconditioned gearbox needed.

Hi you will need a hydrolic press for the job. Remove wheel, brakes, and center hub net. Then remove the clip holding in the bearing. Good luck.

Need new front wheel bearings on Peugeot 206 02 plate how do you change the bearings

Hi mesurements is mm.

It probably the automatic clutch has worn out, please check

Transducer fault also known as gearbox / speed sensor - location on top of gearbox about £20 from dealer

on the facing side of the gearbox is a square socket/bolt which is the filler and level,do not overfill.

could be a gearbox cooler fault if ure engines temperature is 90 degrees thats ok because thats known as operating temperature, ure engine is most efficient at that temperature, however if u have a cooler fault with ure gearbox then this may be causing it to overheat internally and may damage ure gearbox in constant use i would advise having ure gearbox cooler checked.

try get gearbox re programmed 1st, this might just be whats wrong, this is a dpo box which is so poor quality and week. find a transmission company and book in fo the reprograme.