Questions & Answers for: maytag bottom freezer sealing closed

freezer door is closed i can use mu little finger to open the door with almost no pressure. it is causing frost to build up. the fridge is about 4 yrs ols, could i need a new seal? check the hinges on

...Maytag model # msd2732gr. All of a sudden the freezer door does not close properly. its a visual thing inspect and look for somthing not right[ie..door seal torn,door warped.hinge cam broken.somthing ...

...freezer seal,bottom half of door won't close tight I changed the seal on my 1974 Frigidaire cold spot freezer,when I closed the door the bottom half of the door will not close even with pressure ...

...Maytag side by side has frost that develops on the inside of the freezer door. I scrape it off but it re-appears.... on te bottom 1/3 of the door... almost looks like a water leak... but no water ...

...Maytag fridge is not working, but my freezer works fine. What do I do? The freezer is on the bottom, with the fridge being on top Hi Do you have any ice cream in the freezer? If it is soft than the ...

Seal on door(s) seems to be bad. Can't keep doors closed properly. Does the seal have to be replaced? It isn't covered under the extended warranty. Hi, That is not that hard to fix and you can easily ...

...freezer door. In any case, how can I repair this seal? If you lift and push on the door, the seal re-engages, but lasts only as long as you hold the door. Most likely cam kit / door close kit at ...

Woke up this morning and the refrigerator part was 60 degrees but the freezer was still cold. This happened before and the tech 'thawed' the freezer out with a steamer. He said that it would keep ...

Maytag refrigerator not cold. 6 yr old bottom freezer, double door refrigerator only gets cool, not cold even though it's been on max cold for 2 weeks. Still runs quietly and not all the time. No ...

...Maytag Plus fridge Model MSD2456GEW It seems water is leaking from the door to the bottom of the freezer.what could be causing this? freezer defrosting lid or door not properly closed bad door seal ...