...replace this. First I need a part, and second, I need some direction in replacing the seal.Thanks. Pay the repair guy, even if it didn't include the part (seal) its cheap at $200. I replaced my door ...
Question about Nexxt Premium WFMC6400UC Front Load Washer
...it is the bearings on the tub shaft. I just replaced a set on my front loader for the 2nd time. It is not a real easy fix but mine cost only cost 25.00 for the 2 bearings and seal. Not from
...trouble. If it is the latter then dont just replace water seal, replace the bearings as well. A set of bearings and water seal will cost around £50/£75 and should take a few hours to
cost to repair. But, if you have a front loader, that is a different story, since the entire machine needs to be torn apart to get to the bearings and the replacement parts and labor can be as much as
...front loaders which can have new bearings fitted, bearing replacement is a very labour-intensive job and is often not cost effective. On commercial machines it's usually far more straightforward. ...
...cost and can you install yourself? The front seal can be replaced by you provided that you are able get the spares. I shall give you a link fromwhere spares can be sourced and replaced as a DIY. ...
Question about Elite 45986 Front Load Washer
...cost of a replacement bellow is far less expensive than replacing the entire washer. The last time I checked (I personally own a front loader), these washers are not cheap.If you determine, the ...
...replace both bearings the main seal and shaft, it can be quite costly. if its a front loader you will need the main seal and both bearings and will cost twice as much as the top loader as it takes ...
Question about Elite 45986 Front Load Washer
...front loaders, almost always , it will need a new drum shaft. The costs to fix can be expensive. To confirm bearing failure, you can see if the tub moves and clunks on the main shaft and the noise ...
Question about Elite 45986 Front Load Washer
cost to repack bearings on a 14 yr old LG THROMM front loader The LG TROMM has been a quiet work horse for 14 yrs.. You can't they are sealed. You just replace them. The sealed bearing units are shown
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions