Question about Mitsubishi VS-60707 60" Rear Projection Television

1 Answer

Horizontal hold? the picture image gets distorted when you first turn it on...the image on the screen jumps similar to the way old sets did and you could correct the issue with a horizontal hold control. This big screen doesn't have this type of control as far as I know It started out as a minor nuisance and it would get better the longer the set was on...now the picture "jumps" all the time. Any ideas? Thanks in advance!

Posted by on

  • 3 more comments 
  • Anonymous Aug 21, 2008

    my picture screen jumps sometimes

  • Anonymous Oct 01, 2008

    same thing happens..and it takes longer and longer to warm up.

  • ky4life70 Oct 26, 2008

    The horizontal hold on my VS60607 is way off. Any idea how I can fix this with out it costing a fortune?

  • dso33 Nov 26, 2008

    I too have the same problem, TV picture and sound is on, only it jitters so much you can't watch it. A solution would be helpful if any have one. Thanks, Susan

  • bestbuygreat Dec 03, 2008

    i have the same problem. can anyone help me?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mitsubishi Master
  • 8,617 Answers

Possible bad solder connections at the horizontal drive transformer connections, could also be a bad capacitor in the horizontal circuit look for Capacitors that are bulged or show signs of leakage.

Posted on Aug 20, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

We have a roughly 10 yr old tv that was given to us from friends (therefore we dont have waranty), and it has just started flickering red lines horizontally across the screen. It is a large non-flat rear...


Ur convergence is dead.These problems are colors misalines,3D pictures,colors distorted.U know how to solders?Must replaced 2 convergence ICS,and some or all it resistors.Buy a convergence kit at Tv repair World.com,Tvrepairkits.com to repair it ur self.The shop will cost U $300 for parts and labors.

Feb 16, 2010 | Televison & Video

1 Answer

Red and blue ghosting,


The most likely cause is shorted convergence chips and possibly a few pico fuses.

These sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the picture to look normal. This is called convergence.

When its out of alignment the video will look 3-D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired. Convergence problems are very common on all Projection TV sets including Sony,Samsung,JVC,Philip Magnavox,Panasonic,Akai,Pioneer2_bing.gif Hitachi,Mitsubishi,Zenith and others.
You can get a convergenece repair kit with instructions from the links below.

Here are some of the most common problems with these sets...

Problem #1) Convergence

Yours may have one or more of the following symptoms...

*Screen Looks 3-D
*Colors wont align
*Screen may look distorted or warped
*No Audio/Video - TV Shuts down - May also make a constant chirping sound

Problem #2
Another common problem is dull or washed out video.

Your set may have one or more of the following symptoms....

*Dull looking picture
*White looking picture
*Halos around objects
*Red/Orange looking picture

You can see some more examples and find a fix herebb0cf99.png http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Jul 12, 2009 | LG RU-52SZ51D 52" Rear Projection...

1 Answer

Toshiba 50H81 projection television


Projection sets have two very common problems.

The first common problem is convergence


These sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the picture to look normal. This is called convergence.

When its out of alignment the video will look 3-D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired. Convergence problems are very common on all Projection TV sets including Sony, Samsung,JVC,Philip Magnavox,Panasonic,Akai,Pioneer, Hitachi,Mitsubishi,Zenith and others.
You can get more information and a DIY convergenece repair kit with instructions from the link below.

Here are some of the most common problems with these sets...

*Screen Looks 3-D
*Colors wont align
*Screen may look distorted or warped
*No Audio/Video - TV Shuts down - May also make a constant chirping sound

Problem #2 - Another common problem is dull or washed out video.

Your set may have one or more of the following symptoms....

*Dull looking picture
*White looking picture
*Halos around objects
*Red/Orange looking picture

bb0cf99.pngYou can see some more examples and find a fix using this link on Fixya http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Oct 22, 2008 | Toshiba 50H81 50" Rear Projection...

1 Answer

Distortion and double imaging


Projection sets have two very common problems.

The first common problem is convergence


These sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the picture to look normal. This is called convergence.

When its out of alignment the video will look 3-D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired. Convergence problems are very common on all Projection TV sets including Sony, Samsung,JVC,Philip Magnavox,Panasonic,Akai,Pioneer, Hitachi,Mitsubishi,Zenith and others.
You can get more information and a DIY convergenece repair kit with instructions from the link below.

Here are some of the most common problems with these sets...

*Screen Looks 3-D
*Colors wont align
*Screen may look distorted or warped
*No Audio/Video - TV Shuts down - May also make a constant chirping sound

Problem #2 - Another common problem is dull or washed out video.

Your set may have one or more of the following symptoms....

*Dull looking picture
*White looking picture
*Halos around objects
*Red/Orange looking picture

bb0cf99.pngYou can see some more examples and find a fix using this link on Fixya http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Sep 07, 2008 | Hitachi 53UDX10B 53" Rear Projection...

2 Answers

Sony KP-51WS510


you need a green CRT thats whay you have the white kind of concave lines with the green screen. You can try adjusting the green screen control but you need anew CRT ( tube) the speaker cover has two plastic plugs that get removed on the lower edge os the grille which covers the two screws that hold the grille on. If you need more assistancr or where to get a green CRT let me know as I have a link that has some green and red Tubes for your model.

Sep 05, 2008 | Sony KP-51WS510 51" Rear Projection...

2 Answers

Mitsubishi VS-50707


Click here to get more info on the subject and also check the other links in that post.
Good Luck.

Apr 29, 2008 | Mitsubishi VS-50707 50" Rear Projection...

1 Answer

Distorted picture


i was just working on a set with the same problem .. i found a east west correction curicit with a falty transistor. something in that cuircit has failed.

Jan 05, 2008 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

Diagonal distorted picture


convergance amp ic bad
http://home.earthlink.net/~oleg.filippov/ConvergenceFix.htm

Dec 14, 2007 | Toshiba 50H72 50" Rear Projection...

1 Answer

Distorted view at upper 20% of screen horizontally


Wow for the convergence to shift you must have really moved it. First try the manual convergence on the set. if that dosent help then your gonna need a pro to come in and adjust it for you as it takes special equipment and the know how to do this kind of alighnment as its not a consumer alighnment sorry couldnt assist more. Good Luck

Jun 11, 2006 | Hitachi 43UWX10B 43" Rear Projection...

Not finding what you are looking for?
Mitsubishi VS-60707 60" Rear Projection Television Logo

Related Topics:

271 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1198 Answers

The Knight
The Knight

Level 3 Expert

69808 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...