I need rear replacement wheels for my Simplicity Jack Canister vacuum. They were replaced under warranty a year ago and they have cracked again. It's a plastic wheel with a rubber tread. The plastic has cracked full circle where it joins to the rubber tread. Looks like a design flaw to me.

it is not a computer so I moved you to vacuums.
and is MIELE maker, blue moon is just a model.
reading the manual on this crazy expensive vac
shows.
Due to its typical life expectancy of 1200 hours, Miele proudly warranties this motor for seven years, 1 year on the rest.
get it serviced in a shop , ?
deal wall jack, AC
dog eat the cord to it?
the vacuum is defective (broken)
ours runs on 120vac 15 amps , if you moved outside USA that voltage is wrong, so check that first. if moved or bought a vacuum from outside USA or the REVERSE.

Hi Eddie, it's Jack at Dyson.

I'm sorry to hear you're concerned about your Dyson canister, but from the information you've provided I'm not clear on exactly which part you think may not be sealing correctly.

The quickest way of resolving this would be to call our experts directly so we can help further. If a repair or a replacement part is needed, we can confirm whether this would be covered under your Dyson warranty.

You can reach us by calling 1-866-693-9766 (US), 1-877-397-6622 (CA) 1800 239 766 (AU), or 0800 298 0298 (UK).

We'll look forward to speaking with you.

Hi Randy, it's Jack at Dyson.

If the release button appears to be jammed, our experts should be able to talk you through freeing it with some troubleshooting checks over the phone. If not, we'll be happy to confirm if replacement parts are covered under our 5-year warranty.

For assistance, please contact us directly on 0800 298 0298 (UK), 1-866-693-9766 (US), 1-877-397-6622 (CA) or 1800 239 766 (AU). Make sure you have your DC39 to hand when you call.

Hi Joanne, it's Jack at Dyson.

I'm sorry to hear you're having difficulty with your DC39 Multi Floor. If the brush bar only seems to be working intermittently, we should be able to help - and if a replacement part is needed we can confirm if this is covered under our 5-year warranty.

When you have your machine easily to hand, please give our experts a call on 0800 298 0298 (UK), 1-866-693-9766 (US), 1-877-397-6622 (CA) or 1800 239 766 (AU).

We'll look forward to hearing from you.

Hi, I had the same problem with mine and found that if you plug the power head directly into the handpiece (bypassing the telescopic wand) and it worked only proved the problem is in the telescopic wand. The problem as I found was a broken terminal in the end that connects to the powerhead (female socket). As it is a non repairable part means replacement at $100AUS I have had my machine for 3 years and in this time have replaced the both powerhead once and the wand twice within 2 years of owning the machine. The wand has now gone faulty again 4 months after replacing it and consequently Electrolux only warranty spares for 3 months which I think is poor! Its a great machine but a little too delicate even if it is only used for domestic operations once a fortnight! I paid $700 for my Oxy3 3 years ago and wont be buying another Electrolux product due to poor service (customer and product):((

The Hoover Fusion Plus Cyclonic Upright Vacuum has a 1 year manufacturers warranty from date of purchase. You need to check your reciept to see if it's under a year old. Then go to the Hoover.com web site to find the closest Hoover warranty service center to where you live. Bring the proof of purchase and the vacuum to them.

There is a thermal reset button on your vaccum. It is on the rear of the unit, just below the attachments and next to the sticker with the serial numer etc on it. The vacuum is designed to turn itself of if too much heat gets built up to prevent it from "burning up."

SURBAN VACUUM 315-4543111 ASK FOR KEN

TAKE IT TO A DEALER HE WILL HAVE THE PARTS FOR IT

you might be better off taking it to sears. taking the rear wheels off may do more damage then before.