LG wont change channels with remote or manually Volume changes but scans all the way to 100 or zero depending which way its pressed help i'm stuck on BBC!!

One possible thought is to change the batteries in the remote itself.

Hello

In the CBL/SAT or TV mode, use the FAV key to start a 3-second scan of all

channels.Or, if programmed, use the FAV key to scan only your favorite
channels to view a desired channel

Press CBL/SAT or TV once.

Press FAV once.

• IfFavorite Channel Scan has been set up, scanning of

favorite channels will start with up to 100 channel changes
or until stopped by pressing any key.

IfFavorite Channel Scan has not been set up, scanning

will start with the current channel, and continue up to
100 channel changes or until stopped by pressing any key.

To stop scanning channels at any time, press any key
once.

I HAD THE EXACT SAME ISSUE ON MY LG TV. WENT THROUGH EVERY PROCESS REMOVE BATTERIES, UNPLUG ETHERNET CABLE, HOLD IN POWER BUTTON ETC ONLY TO FOND OUT IT WAS MY FIRESTICK REMOTE THAT WAS THE PROBLEM.
THATS WHAT WAS TURNING TGE VOLUME UP TO 100.
I CHANGED THE BATTERIES AND CLEANED THE BUTTONS AND TURNED IT DOWN. PROBLEM HAS NOW GONE.

Hello,

You can get this fix by resetting the television
Forced to factory default: press and hold [VOLUME ( - )] on the TV and press [MENU] on the remote 2 seconds. Exit: Unplug Power to reset.
If it does not help, the main board need to replace.

Hope this helps....

U have 2 situations:
1st U have a tv Key stucked or internal control board defective.
2nd U have a broken tv remote control.

Note: Check for stuck pressed keys on TV, if not send to repair shop, for checkup.

I have Aiwa TV MODEL No. TV-A149
The problem that I am suddenly facing is that I can't change channels or volume or use any other function. I can't even turn it off with remote control.

Its stuck randomly on a particular channel that I was watching at that point of time.

Along with that channel it now shows a message in flashing red color that reads :-
AGING
6EDEH

Now when I press ''Display'' button on remote control volume goes off and this code is shown :-
S123 K234 Y
100 000 0


The numbers in the second line can be navigated by ''CH+'' button and changed between 0 and 1 by ''Vol+'' button.

I really don't know anything about this. So, please help me out of this problem.

check remote first,how to check remote switch on your camera phone point to camera lens,when press any key check screen light glow,you sure r/c ok.next check reciver eye of tv

The circuit or integrated circuit being controlled has likely failed. You might try 'resetting' it by pulling the AC plug overnight. If that has no effect, a repair is unavoidable. This model seems to be developing a number of different problems.

If you have a Universal remote ask here for the remote codes. They helped me alread a lot!

It's hard to diagnose without a model, but, given the problem I would say it is a 42LC7.
If it is, then, it needs a modification in the main PCB. We used to jumper coils at first, now we have to change the main PCB.
It's less than a year old, it's under warranty.
For a servicer in your area that makes house calls:
Contact LG at:
(800) 243-0000
If you have any questions, reply to this post and I will respond.