I need the remote code for my mem. tv i just bought

Hyundai Universal Remote Tv Full remote control with ...

tv.manualsonline.com > ... > Hyundai Universal Remote

Hyundai Tv Full remote control with exclusive Dynamic Database Technology ... replaced, the remote control will stop ... is preprogrammed with codes for the.

Universal Remote Control Remote Control Code hyundai tv ...

www.fixya.com > ... > Universal Remote Control Remote Control

code for Hyundai Q320 TV What is the universal 3-digit remote code for ... Hyundai TV Code hi! my hyundai TV remote is no longer working so i bought a ...

hyundai tv remote code Questions & Answers - Fixya

www.fixya.com > Forum > Tags

To set the clock on the unit, have the TV connected to power but not on. Then press and hold Mem/Clck Adj on the TV (it's the third button from the right in the top row of controls). Use the adjacent Tune/Clk (up/down arrows) to set the clock for 12 or 24 hour time. Then press Mem/Clk Adj again to adjust the hour with the up/down arrows. Press Mem/Clk Adj again and set the minutes. Press Mem/Clk Adj to save the time. The original remote also has these buttons. Mem/Clk Adj is also labeled Set and is the furthest right button on the second to bottom row of the remote. The Tune/Clk buttons are the DN and UP buttons on the left of this row.

Use the Tune/Clk arrows to change the radio channels after pressing the radio button (second from the right on the bottom row). When you press the TV button (first on the right of the bottom row) to watch TV, then you need to use the Channel up/down arrows at the top and bottom of the ring control on the far right of the TV or the Channel + and Channel - buttons on the remote. On the remote, the Channel + button is below the timer button which is below 9 in the keypad section. Enter is below the Channel + button and Channel - is below Enter. Make sure that the TV is in the correct mode for your signal (ATSC for OTA and NTSC for analog cable) by pressing the TV mode button. If you are using a set top box, you will need to change the channels at the box.

Press the TV Menu button and then go down the list to Time to set the time zone for the TV. Press Enter to save the setting. Use the TV Scan button to get a list of available channels before trying to change channels.

The manual for the GPX KL868S is available from GPX at the product page: http://www.gpx.com/store/p/287-KL858S.aspx . The direct link to the English version of the manual is: http://www.gpx.com/owners_manuals/KL858S-IB.pdf .

I hope this helps.

Cindy Wells

Try all of these. Hope it works out =)044,005,009,056,057,155,156,172

need code for e gear tv for remote

I NEED WANSA 29" TV MODEL TK2966
REMOTE MODEL NO (OR) MODEL IMEAGE

each remote has a new setup.normarlly oo4 does it.

Try pressing the TV button on the Prima remote to make it work on the TV. It should work on the Prima Tv without new codes. Codes would be needed for your cable box.
Consider calling Prima at 866-447-7462 for the codes. They should have a website for the codes or email you the codes for free.

PS Please rate me if this helps.

We broke our remote for the Durabrand 13 inch tv, bought a RCA universal remote and that did not work. Just bought the radio shack 3 in 1 remote for $7.99 and it had the codes for the Durabrand tv and it worked fine. Hope this helps.

try these codes for the orion tv:0121,0135 or 0035. good luck

if the universal remote you bought does not have the code for your tv then my friend you are in bad luck you cannot use another code that does not go along with your remote.try www.partstore.com and see if you can purchase a originald remote for you tv.good luck.