At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
I was busy down loading, left my laptop and it went into hypernate, afterwards try to switch it back on, and then the screen is very dark, I restart stil the same
Re: I was busy down loading, left my laptop and it went...
This is very simple un hypernate it and if its still doing the same then u have shutdown wrongly and to restart it remove the battery and put the back then on the laptop and lets see thnks .
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
1. unplug the ac adapter and remove the battery .
2. press and hold power button for a minute
3. now put the battery back and plug in ac adapter
4. turn on the laptop now
it should work.
if not, try removing hard drive and memory modules then reinstall them back.
if the issue persists, your motherbord has gone bad.
Sorry to give bad news, but the backlight is probably on its way out, this could also be down to the inverter, difficult to tell without seeing it. The acid test is to try the laptop on an external monitor and if it works on that, this confirms the dying screen issue.
If however it does not, your problems are likely to be related to the graphics chip on the motherboard.
YES...! After holding switch in up pos for 10 seconds, it went dark. Then I performed normal start up of Fuze (Holding switch for 1 2 seconds and it started up normal with display and is now recognized.
This problem ocurred when I left the unit plugged in to USB and closed lid of my laptop overnight. ( Laptop set to go into suspend mode)
Hey there SeanJohn79, have you tried hooking an external monitor to your laptop. You can move the video output back and forth, from external, LCD + external, LCD using Fn + F7. Hopefully this will allow you to see the necessary info for diagnosing the problem. Good Luck. Keep us posted! In case you are not aware, these are some display related key functions:
Fn + F3 = turn off lcd
Fn + F8 =Switch computer screen size
Fn + F12 =Hibernation mode, power for 4 secs releases.
Fn + F4 = Standby mode, press Fn key to return to normal
If you haven't tried switching some of these, give it a shot.
×