Question about Whirlpool LSB6200KQ Top Load Washer

2 Answers

Roper washer water keeps filling and running right out. Never fills up. The washer is just over one year old.

Posted by on

2 Answers

Simply lift the drain pipe outlet to the same height of the tub. this will stop the water siphening out when filling.

Posted on Jul 15, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the same damn issue with my Samsung washing machine(Top Loader) Not quite sure why it does it.Help please really annoying.

Posted on Jul 13, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Unit is filling up half way or so and just keeps running, but will not fill up all the way almost like water is draining and running at same time


Tub keeps filling does not overflow.
Solution:
Drain hose must be 36 inchs above floor level to prevent siphoning.

Dec 26, 2009 | Roper RAS8445KQ Top Load Washer

1 Answer

Roper washer leaks when filling


It's in the drain hose somewhere,during the fill the water gets as deep in the drain hose as it does in the washer,during the wash the pump runs in reverse keeping the water level in the hose low,during the drain the hose is filled again.
Prop the washer up in front on a couple bricks or boards,start putting in water until it starts to leak and take a peak under the machine.

Sep 27, 2009 | Washing Machines

1 Answer

Washer fills up but wont switch to agitate


posibble bad timer. if it is skipping over the agitate.

Jun 15, 2009 | Roper RAS8445KQ Top Load Washer

2 Answers

My washer won't fill up with water


SOUNDS LIKE YOUR INLET WATER VALVE HAS CHUCKED IN THE TOWEL.
WHEN YOU TURN THE MACHINE ON TO FILL UP THE VALVE OPENS TO LET THE WATER INTO THE MACHINE, IF THE VALVE DOES NOT OPEN THEN NO WATER WILL ENTER IT
THE VALVE WILL BE BEHIND THE PANEL WHERE THE HOSE ENTERS THE MACHINE
THEY ARE REASONABLY CHEAP AND SHOULD BE ABLE TO BE REPLACED BY A HANDYMAN OR WOMAN, JUST MAKE SURE YOU PUT THE WIRES BACK ON THE SAME TERMINALS AS THE OLD VALVE

Jun 06, 2009 | Roper RAS6233KQ Top Load Washer

2 Answers

Washing maching not filling with water


The problem is most likely the water fill sensor switch. If it is telling the machine that it is full, it will go right to agitate.

Apr 25, 2009 | Roper RAB2121KW Top Load Washer

1 Answer

Roper washer will fill but does not spin/drain


Sounds like a lid switch. If it fills and just sits there, Im working on a tutorial for this. Dave www.washermd.com

Jan 13, 2009 | GE WSM2420T Top Load Stacked Washer /...

1 Answer

Wont fill up with water it drains out before its full


If you hear the motor running when it is draining then you have a bad timer. If it just drains out and the motor is not running then you have a siphon problem which is caused if the drain hose is too low. Let me know what you find.

Dec 03, 2008 | Roper RAS8445KQ Top Load Washer

2 Answers

Older Roper Washer will not spin or drain. It will fill and ajatate until it comes to the spin cycle


ck lid switch probably broke if switch lever is still in up position try pushing it to bottom of travel with pencil..

Sep 05, 2008 | Washing Machines

Not finding what you are looking for?
Whirlpool LSB6200KQ Top Load Washer Logo

164 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...