20 Most Recent Roper RAS8445KQ Top Load Washer Questions & Answers


unplug machine for 30 minutes.

Roper RAS8445KQ... | Answered on May 08, 2017


two screws to remove top panel. 2 clips to remove cabinet . remove lid switch . of course unplug machine.

Roper RAS8445KQ... | Answered on May 08, 2017


most likely a bad lid switch

Roper RAS8445KQ... | Answered on May 08, 2017


no cleanable lint filters

Roper RAS8445KQ... | Answered on May 08, 2017


CHECK UR WATER INLET VALVE THE HOT COILS MAY HAVE GONE BAD? CHECK FOR OHMS AND FOR VOLTAGE, THEN ALSO CHECK UR WATER TEMPERATURE SWITCH, IT MAY BE DEFECTIVE.


25709428-up413230zer0uf0bq1q5iqv1-4-0.jpg

25709428-up413230zer0uf0bq1q5iqv1-4-2.jpg

25709428-up413230zer0uf0bq1q5iqv1-4-5.jpg

25709428-up413230zer0uf0bq1q5iqv1-4-9.jpg

25709428-up413230zer0uf0bq1q5iqv1-4-14.jpg

Roper RAS8445KQ... | Answered on May 23, 2015


it has a self cleaning filter mounted under the tub. if you want to clean out the tub and filter thoroughly then:
  • run a cycle with no clothes using hot water and a gallon or two of bleach. 
  • after the tub has filled up add a teaspoon or less of dish liquid like palmolive. this acts like a surfactant for the bleach. 
  • make sure you also run an extra rinse cycle to make sure you have all the bleach out of the machine before putting clothes in.

Roper RAS8445KQ... | Answered on May 14, 2015


You possibly could have a bad lid switch. The machine may think you still have the lid up and that is why it stops and will not do anything else.

Roper RAS8445KQ... | Answered on Feb 10, 2015


Your mixing valve sounds like it is dead. Pretty easy fix! Do some Googling to find out how to install your particular model and type. Write down your Brand name model number and get a new mixing valve online. bada bing! You just saved yourself $150.

Roper RAS8445KQ... | Answered on Feb 08, 2015


Can you easily turn the motor by hand? If not, the motor bearings may need oil on the felt pads which surround them. Dribble it down beside the shaft at each end (after removing from washer and standing vertically). Any automotive engine oil would be fine.

Roper RAS8445KQ... | Answered on Jan 21, 2015


This should be belt driven? I would imagine jut adjusting the tensionwould work.

Roper RAS8445KQ... | Answered on Dec 16, 2014


check to see when and where you are to add the softener read the manual for tips look in the trouble shooting guide

Roper RAS8445KQ... | Answered on Nov 29, 2014


The pressure switch has to be satisfied first, then it will agitate. There is a way to force the agitation, but hooking up the water would be easiest. Hope this helps

Roper RAS8445KQ... | Answered on Jul 22, 2014

Not finding what you are looking for?
Roper RAS8445KQ Top Load Washer Logo

654 questions posted

Ask a Question

Usually answered in minutes!

Top Roper Washing Machines Experts

Marvin
Marvin

Level 3 Expert

84625 Answers

Mike

Level 3 Expert

4357 Answers

Sal De

Level 3 Expert

2699 Answers

Are you a Roper Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Roper Washing Machines

  • Roper Washing Machines

Most Popular Question

roper washing machine makes grinding

  • Washing Machines
Loading...