System does not recognize the driver - Samsung SH-S182 DVD±RW Dual Layer Burner

New systems have integrated sound cards, so most likely it just the drivers you need,

However, if you have a PCI add on card it should be plug and play. Again you may need the drivers or setup the PCI card so it recognizes it.

If you have an antiquated system then you need to find and adjust the IRQ settings in BIOS. Some software like games also have specific IRQ setting so there are no conflicts. I am talking old like Win 3.1, 95, or 98.

1st You download Webcam Driver.
Usb not recognized
After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.

use Windows Device Driver Rollback to replace the driver with the previously installed version.
1 Click the Start button and click Control Panel.2 Under Pick a Category, click Performance and Maintenance.3 Click System.4 In the System Properties window, click the Hardware tab.5 Click Device Manager.6 Right-click the device for which the new driver was installed and click Properties.7 Click the Drivers tab.8 Click Roll Back Driver.If Device Driver Rollback does not resolve the problem, then use System Restore to return your computer to the operating state that existed before you installed the new driver.
If the problem still occurs then use a system utility tool like Reginout for an instant fix.

Maybe it is not recognized by the MAC operating system. Just download driver associated with MAC operating system and install it. Some hardware need software driver to be able to work. Some just plug and play.

Try these here:

http://www.dynexproducts.com/t-drivers.aspx

you need to go to delet all the drivers that you have by going to control panel, system, device maanger and delet the drivers reboot and the system will start reading asll your drivers again and it should work..

Hello,

Regarding on your problem, in windows xp and up version of windows operating system, plug and play device is easy and no need to install its drivers manually cause the computer will automatically install its drivers. But in the case of Windows 98 you have to install your USB Driver manually in order to be recognize by the system. So my recommendation please insert the CD driver or load the driver of your USB and run the setup.exe to install the USB Driver.

Thanks

Vista does not recognize many accessories if the correct driver is not present its driver database.Its not possible to install separate drivers for any additional component. Either buy a Vista compatible device or use WinXP_SP3....sodeep

Install the Driver Again
http://www.sony.co.in/support/download/140059/product/dcr-hc28e/modelfirst

Enjoy

rajkumar