I wish to have mfc-240-c software to install in

The drivers and software for the Brother DCP-135C 4 IN 1 Flatbed Digital MFC All-In-One InkJet Printer can be downloaded by clicking on download below.

Download

OR use the link provided

http://download.brother.com/welcome/dlf002943/135INST-A.EXE

1.Enter the link provided in the navigation bar
2.And press enter
3.You will get a pop-up screen, select save as to destination you wish to save.
4.After completion install the downloaded file.



I hope this information will be helpful. Thank you for using FixYa!

Click here Click on above link download driver for your os then install on computer then you can use your printer. First uninstall old driver and software from computer then reinstall driver from new downlaod. Let me know if you need further assistance. Thanks for using FixYa.

the printer is not proper install of the software drivers

You must have the Brother printer control center installed on the the computer you wish to scan to. If you do not have the original software disk that came with the printer, you can download it from the brother web site (www.brother.com).

Yes, you are in luck. Brother provides great support for Linux users.

Visit their site to learn about all their offerings:

If you have the MFC-215C printer,

then please use the MFC-210C driver.

First Install the software for your printer and when asked to connect printer turn on your printer and connect it to your computer.

http://solutions.brother.com/linux/sol/printer/linux/lpr_drivers.html

change your usb cable but first install and sure that u istall driver for your printrt properly.

go to brother.com website and download vista drivers and software for the 240

Here is the link for the entire software package for XP.. download and install this.. It should resolve the scanning issue.. did on mine
http://welcome.solutions.brother.com/bsc/public/us/us/en/dlf/dlf/000000/002300/dlf002310.html?reg=us&c=us&lang=en&prod=mfc240c_all&type2=1&os=7&flang=8&dlid=dlf002310

The solution for this one's an easy fix. All you have to do is go to brother, click on Product Support, select your country or the nearest one to you, then where it says please enter your model name type in mfc-240c and hit enter. Click where it says MFC-240C and then go to downloads, select drivers, then your operating system, and then your language, and finally, click search. It will bring you to the page with teh drivers for your printer. In the downloads area, you can also download the manuals, the software for your printer, etc.. It's all quite well laid out. Let me know if you run into any problems.

~adamvan2000