Would like to know how reset my remote control to and old freeview box

Some times the remote you have no set-up codes to none of these devices. http://electrohelponline.blogspot.com/. Check this link, and try some other codes to your devices. Wish you sucess.

reset the code go to www.fitness.manualsonline.com or www. remotecodelist.com

God bless you

xtreamz_69,

It sounds like you connected the coax cable to your TV. What channel is the TV set on when you have the Freeview connected? Because you are using a coax cable, the TV should be set to either channel 3 or 4 (normally channel 3). Check to make sure your TV is on one of those channels. Also verify your receiver is on. Your TV has the several other type ports (HDMI, component, composite) as alternatives to pick up your picture. If you have any other questions, please post to this site.

Ray Calo
DISH Network

http://www.remote-controls-shop.co.uk/freeview/user-manual-pdf.aspx?brand=Thomson&model=DTI1000&display=file.pdf

There you go.
Zahc

go online and google it

im looking for sagem freeview code on total control.
thank you

hi can anyone HELP I HAVE COBOLT JUMBO REMOTE BUT NO CODE FOR ACCER LCD

That is because the switches of the front panel buttons are stuck or defective.

Try first unplugging power for ten minutes, this probably wont work.

To fix this the TV must be taken apart from an expert, and front panel replaced.

You can enquiry here for parts.

What you can do at home, is getting a replacement remote and using TV with a remote, or buying a freeview box, and watching and changing channels through the box.

You can get a replacement remote here: Replacement Remote Control orReplacement Remotes

My suggestion, if it is supported in your area, get a set top box with 30 channels : Freeview - digital TV from Argos.

replace system control and memory control.

According to the booklet you have to enter the code 119 for a Goodmans TV, however it does not work with my Goodmans portable TV and even quick search / autoscan doesn't find the TV.