My COD: Ghosts DISC2 won't install every time a pop-up appears saying "No Save Device Was Selected". What should I do I'm running it on Xbox360 with 320Gb Hard drive installed.

You must make sure your PS3 is activated for your game DL's. Here is how to do it. At the XMB, sign in to PSN. When you do, a tab will open up that says account management. Scroll down to System activation. There, you can select to activate/deactivate your system and PSP for games and DLC content.

You must activate your system first. Here are the steps.
1 power on
2 log into the system
3 sign in to psn
4 Account Management
5 System Activation
6 PS3 System
7 Games and videos
Remember, SCEA only allows (2) systems to be activated under the same account. So even if you had 3 systems in your house, you can only activate 2. After your system is activated, then you can enjoy your new maps. ^^ P.S. As of this writing, "DEVASTATION" will be released for the PS3 TOMORROW!

Try right clicking on the game and using the "Verify Downloaded Content" option. This will check that all the game files you have downloaded are not corrupt and will replace any bad ones.

The disk might be corrupt.. so its saying that the device data has been lost.

This happened to me, it was because the computer I was using was too old

Change your XBOX360 video output from 1080p to 720p or 1080i.

Hi.

Pop the install DVD into the drive and restart your laptop. When you see the Dell logo hit the F2 key to get you into the BIOS. Look for boot options in the list and set the DVD/CD drive as the first boot device. Save the changes and exit the BIOS.

The laptop should restart and boot form the DVD/CD drive so you can install the operating system.



Good luck and regards.

it is becuase the dazzle capture device is not selected as your video source. Please try to go back to step number 1 select video source . Make sure that pinnacle file capture is not selected but the dazzle is selected then try it again.

Normal 0 This ptogram will eliminate your problem of the camera being busy or being used by another program. Really works great.

Double click on this site http://download.cnet.com/SplitCam/3000-2348_4-10500269.html
And then click on Download Now (3.5MB)

1. Install Splitcam saying yes to everything during installation including the any warnings.
   
   2. Then run the Splitcam program by double clicking the downloaded program.
   
   3. Clicked on "Video" at the bottom right of the program window and selected your cmera.

Note: This will result in your camera being switched on and viewable in the
SplitCam program.

4. Opened up Skype (or other messengers) and go to "Tools" then "Options" then "Video settings."

5. Also setup your “Audio” while you are there.

6. Selected "SplitCam Capture" as my webcam, then click on save.

7. Webcam image will appeared in Skype or what ever messenger you are using.

Hope this Helps. Bud

Hi,

You need to install the Samsung PC Studio. You can download it here from Samsung. There are also instructions there.