At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi there its depend on the camera type. I mean some time the photo identity no showing the date. For example Sony Camera showing the photo no DSC XXX01012010. Its mean its taken 01 JAN 2010. Some camera mention normal photo identity. But as per your requirement is not possible to change the camera software setting. You have to identify by Serial no. I hope i explain you the full things. If you want to know more then let me know. I try to batter explanation then, Thanks.
E2 - No paper (ASF) E3 - Paper jam E4 - No ink E5 - The ink cartridges are not installed or a non-supported ink cartridge is installed , or the ink cartridges are not installed properly E8 - Waste ink absorber full, or platen waste ink absorber full «??») E9 - The connected digital camera / video camera does not support Camera Direct Printing E14 - The Ink cartridges whose destination are wrong E15 - Ink cartridge is not installed E16 - Ink remaining is unknown E19 - Failed to scan head alignment sheet E22 - Carriage error E23 - Paper feed error E24 - Purge unit error E25 - ASF(cam) sensor error E26 - Internal temperature rise error E27 - Waste ink absorber full or platen waste ink absorber full E28 - Ink cartridge temperature rise error - E29 - EEPROM error E33 - Paper feed position error E35 - USB Host VBUD over current error - USB E37 - Abnormal motor driver error E40 - Other hardware error E42 - Scanner error Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on Helping.
All The Best: Pineworks
Generally speaking, there is nothing you can do to correct the problem other than to send the camera to the appropriate factory service center for correction of the error.
Following the repair cost you should decide, whether it worth it.
Remove and reinsert the batteries to see if the error code will reset. Generally speaking, there is nothing you can do to correct the problem other than to send the camera to the appropriate factory service center for correction of the error.
Following the repair cost, you should decide whether it worth it.
It sound like a problem with the zooming mechanism (lens would not retract or extended)
Press the power button on and hold it down while extending and twisting the telescopic zoom lens. It might fix you problem.
In any case it could not make it worse
Good luck!
×