Lionel # 3830 submarine instructions for assembly

you will need something that will protectyou in water,3830submarinesunderwater sticky glue and a space helmet

Try contacting the Lionel Service Department on
586 949 4100 or use their website contact service. Contact Lionel Trains
Contact Lionel Trains

Lionel Service Manuals

501 Aluminum Rico Station PDF

You may need to have a chip upgrade done to your Legacy controler, especially if it is one of the earlier ones. Go to Lionel.com for instructions on how to determine if you need the upgrade. If this problem was identified for the Blue Comet then you should be able to find the solution listed on the Lionel site. If all else fails, e-mail them a description of the problem. Lionel provides great customer service.

You should be able to get a manual from the Lionel Service Department on 586 949 4100 or use their website contact service. Contact Lionel Trains

Here's a link to Lionel's track documents.
http://www.lionel.com/CustomerService/service-documents/index.cfm?type=supplement&categoryIDList=83&doAction=search&product=&productNumber=

Yes, you do just drop the pellet in...
But if there is any kind of crud built up in the
smoke stack, it may not allow the pellet
to seat on the heating element. Thus the
tamper is included to allow you to push
the pellet all the way down. If you don't
have one, a piece of wooden dowel the right
diameter can be used.

Here's a link to the Service Manual to the 252 Crossing gate.

http://www.lionel.com/media/servicedocuments/71-2714-250.pdf

need instructions for lionel no.445 switch tower

I have uploaded the On Track manual to scribd.com.
Look here:
http://www.scribd.com/doc/76894727/Lionel-on-Track
or search for lionel_on_track.pdf