Konica bizhub 211 maintenance developer - Minolta Di351F All-In-One Printer

replace the drum and developer

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

no such thing. are asking for the procedure to calibrate after replacing developer????

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Yes, as long it did not get wet or used( reached its copy life).

http://www.copytechnet.com/forums/konica-minolta/62595-konika-minolta-bizhub-163-error-code-m2.html

Maintenance call? from your question it is not clear what is the error code.Please see if there is any code appearing besides maintenance call.Note the error code and tell me again so that i can help you.If it is C0500 or C0501 then press the stop button on the panel and restart the machine do not release the button until the code removes.

how can i reset the password for my konica minolta bizhub 211 to remove the maintainance call 2 display?

sintam se cumprimentados, estou com um problema na minha bizhub 211 ela pede para contactar tecnico (M1).como faco

Code M2 means your photocopier machine require maintenance.In maintenance some old parts of your machine will be replaced with the new one and all this will be performed by technical services representative.

to remove code "COF32" from your machine, simply change the developer with the new one. code will remove.
wish you best of luck............

i will like to know how to reset the page count and service my konica myself, also my konica bizhub 250 is showing C-0204