Displaying mualfunction detected (bizhub 250)

Page counter can not be reset, then 98 pages where printed on the copier. Cant have people resetting the machine back to zero to sell.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Utility stop 0 0 stop 0 1 allows U to sevice mode. Go to clear data and clear supply count. M2 will be cleared.

what is the model ######

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

what wrong with the machine before resetting it

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

The fuse blows as soon as its put in the machine. Thats how the machine knows to reset its count

Clean the paper size sensor and change the by pass paper tray size setting on the display "Paper tray change" setting mode.

Maintenance call? from your question it is not clear what is the error code.Please see if there is any code appearing besides maintenance call.Note the error code and tell me again so that i can help you.If it is C0500 or C0501 then press the stop button on the panel and restart the machine do not release the button until the code removes.

how can i reset the password for my konica minolta bizhub 211 to remove the maintainance call 2 display?

to remove code "COF32" from your machine, simply change the developer with the new one. code will remove.
wish you best of luck............

COF32 means the ATDC sensor has detected some unusually high or low readings.
The ATDC sensor measure the toner lever inside the developer unit.
Try swithcing on/off, open/close the front door to clear the code.
If this doesn't work, you'll need an engineer to reset the ATDC level.

Good luck

Tam