Ice maker out, I need a wiring diagram. GE model

Is there any ice remaining in the slots of the ice maker? If not then the water control valve will need to be replaced. If the ice maker still has ice in the cube slots and does nothing then it is the ice maker that needs to be replaced. Here is the=> WR30X10093 Ice Maker for your TBX18SA and the=> WR57X10033 Water Inlet Valve

APPLIANCE 911

I need you to look around your ice maker for a package containing a wiring diagram. I have information related to the Whirlpool 15 inch and 18 inch ice makers but for some reason GE did not publish the repair manual for your model. I want you to check the voltage going into the WR62X10015 Transformer

You should be getting at least 120 volts ac. Then test the voltage coming out of the transformer. What is the voltage coming out of the WR62X10015 Transformer? Check the control board area for a fuse that goes to the
WR62X10015 Transformer
Check for loose connections going to the grid or broken wires on the grid itself. WR29X10073 Cutting Grid Assembly

Here is a link to the GE Monogram Technical Data
The Whirlpool and the GE Monogram Ice Machines are basically the same thing other than part numbers so I am linking to the Click Here=> Whirlpool 15 inch and 18 inch Ice Machine Service Manual I will be here to answer your questions so please let me know should you have questions, More information can be found HERE Thanks Sea Breeze

I think what you are looking for is what is called the bucket glide
It's number 359 on the diagram labeled Ice maker and Dispenser
If not this is the Sears site and they should have what you need

http://www.searspartsdirect.com/partsdirect/part-model/GE-Parts/Refrigerator-Parts/Model-PCF25PGWCWW/0432/0165000?searchedModel=PCF25PGW&blt=

The schematic to my CAN9 is cast into the front cover.

Hi

Thanks for using FixYa. You can download the user manual for GE Ice Cream Maker Model 106765 from the following link—

GE Ice Cream Maker Model 106765 User Manual

Please do rate the solution.

Thanks
Rylee

In my GE side-by-side there is a parts diagram/schematic folded up inside the control knob housing (inside the fresh food compartment).

Hand drawn of the GE # WR30X1009 found in 10-12 yr old Kenmore/sears/GE side by side refers. Couldn't find one ANYWHERE so forgive the hand drawn. Mine would not eject ice, intermintant. Bad microswitch on the on/off/vacation mode between the normally open side.

Bring your model number to my site and enter the model number in Model search. The search will take you to your model and on left side of screen scroll down to wiring diagrams. Click it and you will get the complete wiring diagram. At top right you will see the ice maker. Hope this helps, Thanks, Sea Breeze

Click below

http://servicepartstec.blogspot.com/

well i dont know if you still need help or you already solve it. when i repl repl the ice maker it works on all GE'S you probalbly bought part #wr30x10061 right that is all you need some older model have diferent ice maker that were mechanical this is an electrocnic ice maker is ok if you just repl it just use the extension if you need to coonect the wire harness

I have the same problem -