How do i hook up to vizio

where did you hooked up your ps2, in component input in your tv or through RF tuner of the tv. it will depend which input or you are using so you can set the tv in the right option.

PlayStation usually has 3 wires 1 video 2 audio. on the tv yellow input its video. rotate the wires till you see it on the screen. then the other two are for audio. or if it's a ps3 purchase a hdmi cable.

how long did you leave it unpluged

Because it's a PS2, composite is your best bet. Plug the Yellow red and white wires into the back of the TV. Sometimes if the TV only has component inputs, the yellow output goes into the GREEN input. Hope this helps! =]

I bought a RF Switcher Phillips SWS2325W/17 ...with this I was able to hook up my Wii...TV...DVD...and Directv...works fine...hope this helps

There is only one choice of audio out and that is the optical out put which locate on the far right if facing back of TV.

On your remote, select input as TV, then verfiy that you have set to Antenna, Then scan for channels.

You have to get an optical audio cord.

The optical output on the vizio is right next to the ac cord. Make sure that your audio amp has the same input conection.

Lou Margo
Allied Electronics
[email protected]

turn your tv to channel 3 and then try 4 one of these should work . Also make sure that you have it plugged in the right coax jack in the back

-Josh

Whay kind of cable are you hooking it to your TV with...?

The one that comes with the ps3 is only capable of NTSC, or 480. If that is the cable you are trying to use, you will have to get an HDMI cable, or the component cable (the one with 5 rca's plugs, 3 vid 2 audio), as these cables are capable of the full 720 and 1080 resolutions.