HOW DO I SWITCH ON MY SANSUI STY1655 LED TV WITHOUT REMOTE CONTROLL

reset sansui tv remote control 076k0ut011 Questions ... - Fixya

www.fixya.com > Forum > Tags

...your help in advance. need code for a one for all URC-2060B06 sansui tv try these ... ...sansui tv with a RCA 704 remote control I have sansui tv and a RCA 704 remote ... URC-3021 Remote Control: How do i program this remote to a sansui tv? ... TV Remote Controls Sansui Remote eBay NEW Orion Sansui JVC LED TV ...

reset sansui tv remote control 076k0ut011 Flat Panel ... - Fixya

www.fixya.com > ... > Tags > reset sansui tv remote control 076k0ut011

Flat Panel Televisions reset sansui tv remote control 076k0ut011 questions and answers. ... ...sansui tv to program rca remote to it model # HDLCD1955C need tv code for this model ... Question about Contex 39-inch 1080p LED TV LE39D3.

Original Sansui - Orion TV Remote Control 076K0UT011 ...

? 1:00
https://www.youtube.com/watch?v=mPbRsUI0xnk
Dec 21, 2012 - Uploaded by ElectronicAdventure
Original Sansui - Orion TV Remote Control 076K0UT011 - Save $5 with ... have the New Original Remote ...

[PDF]Operating Instructions For 4-Function Cable

Obviously you could get one from sansui or better yet try ebay they probably will have one it may be a few weeks until one or more show up. Some links to try:

Sansui TV Remote Controls
Sansui Remote eBay
NEW Orion Sansui JVC LED TV Remote Control 076E0TT011 Supplied with models... Replacement Remote for SANSUI HDLCD1909 HDLCD19WB HDLCD1909A

Check it by cleaning up. To clean it, you have to open the remote control. If you wish to get some details about how to clean a remtoe control, check the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/

The remote is cheap by modern standards and the ONLY way.

A variety of remote control codes can be found at InsigniaProducts.com. Failing that, try codes for the following brands: Orion, Emerson, Memorex, Sansui, Sylvania, Zenith.

To control a Sanyo TV with a One for All URC-3021, follow these steps:

1) Turn on your TV.

2) On the remote, press the TV key once.

3) Press and hold SET until the LED blinks twice, then release SET.

4) Enter the four-digit code 0154.

The LED will blink twice.
If it does not blink twice, go back to step 2 and try the same code again.

5) Aim the remote at the TV and press POWER.
The device should turn off.
If it does not turn off, repeat steps 2 through 5 with the next code in the list.


Hope that helps.

I recommend using the auto-search function of your remote.

To have the remote try each TV code it knows one at a time, follow these steps:

1. Turn on your TV.
2. Press and hold the CODE SEARCH button for at least 3 seconds until the red LED lights up and stays lit.
3. Press the TV button on the remote so that the LED blinks once and then remains solid red.
4. Press the ON/OFF button slowly and repeatedly until the TV turns off. The LED will blink once each time you press the ON/OFF button.
   
5. Once the TV turns off, press the ENTER button to store the code and the LED will turn off.
   

I hope that helps.

sansui: 1929, 1911, 1904
or use the general programming tool:
SEARCHING FOR YOUR CODE
If your device does not respond to the remote after
trying all codes listed for your brand, or if your
brand is not listed, try searching for your code. For
example, to search for a code for your TV:
1. Press TV once.
2. Press and hold P until the red LED blinks
twice, then release.
3. Enter 9 9 1. The LED blinks twice.
4. Aim the remote at the TV and press Power.
The remote sends IR codes from its library to
the selected device, starting with the most
popular code first.
5. If the TV responds, go to step 6. If the TV
does not respond, press CH+. The remote will
try the next code. Continue until the TV
responds.
NOTE: Press CH- to try the previous code.
6. To lock in the code, press P once. The LED
blinks twice.
7. To search for other device codes, repeat steps
1 to 6, substituting the appropriate device
key.

If you can provide the RCA remote model # I can be more specific (it should be located on the back or inside battery case.
Anyway depending on whether your remote uses 3 digit codes or 4 digit codes the Sansui TV code is usually 191 or 1191.

1. Press and hold the TV button on the remote. LED will stay "ON".
2. Enter the code for your brand of TV into the remote while continuing to hold the TV button down. LED will go out during number entry and turn back on when the last digit is entered.
3. Release the TV button. LED will flash and go out if number is entered sucessfully, or flash 4 times if it detects an error.
4. Press Channel up or down to see if this has worked.

You can also use the code search function.

1. Turn on the device you wish to control.
2. Press and hold "CODE SEARCH".
3. Press and release the TV, VCR or Cable button. If programming an AUX position, press and release AUX first and then press the device type to be programmed.
4. Release "CODE SEARCH".
5. Press ON/OFF repeatedly until the device turns off. You may have to do this up to 100 times.
6. When the device shuts off press and release ENTER.
7. Try using the remote. If it does not function repeat steps 1 through 6.