Need remote code for Samsung 1080P7/Xaa dvd player

The BN59-00599A remote was included with several Samsung TV models, including the FP-T5084. While it can be used to control some other devices in your home theater system, it doesn't have codes for other TVs. See the user manual available at the support page: https://www.samsung.com/ca/support/model/FPT5084X/XAA/#downloadshttps://www.samsung.com/ca/support/model/FPT5084X/XAA/#downloads . The section on setting the remote for DVD players, VCRs and other devices starts on page 20.

I wish that I had better news for you. To control the Bush TV, look for a generic universal remote that was programmed more than 6 months after the TV was manufactured. (Not all remotes will list codes for Bush TVs, however the code for another brand may work.)

Cindy Wells

Hi there, please get the code here : www.regionfreedvd.net/ www.dvdripper.org/dvd-region-codes-vs-ntscpal/ www.regionfreedvd.net/players.html
www.dvdreviewer.co.uk/Forums/...region_code/page1
Best Regards, Jay_e34r

1) Turn on the player with no disc in the tray
2) Press the Open/Close button to open the tray
3) Press the info button, the firmware version shows up (
4) After the version info disappears, close the tray again by pressing the Open/Close button
5) At this point, it will show "no disc" at the top. Press the Info button again, and this will disappear. If the "no disc" does not disappear then try again by using the REPEAT button 
6) Now type the code that applies for your region (R2 is 57538). A '2' will briefly show up at the top left corner
7) Now press 9, and 9 will show up in the top left corner
8) Power off the player, and turn it on again. You'll have a multi region player

I've found the following codes at the 1080P7 hack:
R1 - 29334
R2 - 57538
R3 - 56732
R4 - 76884
R5 - 53814
R6 - 24462
This worked on my dvd1080p9 R2 DVD player

you can clean your dvd lens with the lens cleaner cd it works if not then go the mechanic and checked it out

if your television is also samsung just press the tv button and automatically working to your tv,then press the dvd and it work in the dvd.

Turn on (on the remote)
-Wait until appears "no disc"
-Open and shut the tray
-Wait for "no disc" again
-Press REPEAT on remote
-Press 76884 on remote (for region 4. I guess that to other regions the codes below**** will apply)
-When appears the number 4 on TV screen, press number 9 on remote
-Press ENTER

Now you have a region free player!

****Codes for other region players:
R1 - 29334
R2 - 38767
R3 - 56732
R4 - 76884
R5 - 53814
R6 - 24462

HI
WENT ON THE SAMSUNG WEBSITE AND DOWNLOADED THE MANUAL. THE INFORMATION WAS COVERED IN THIS.
THANKS FOR FOLLOWING UP.
CHEERS KENNETH

NO SIGNAL IN MY DVD 1080P7

The following hack was meant for a Samsung HD870 that shares many components with the HD1080P7 (Region 2 restricted).

It would have to be done using the original remote control that came with the DVD..

1. Turn on the Player with no disc on the tray, displayon TV would be "No Disk";
2. Press the "Repeat" key on the Samsung remote control;
3. Press the keys: "5 7 5 3 8" on the remote. Number 2 would appear on the screen for a short time;
4. Press "9". Number 9 is displayed on the screen;
5. Press the "Open/close" button on the remote. The tray will open. Leave it open for a few seconds; and
6. Press the "On/off" button in the remote.
This hack was originally posted here.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.