Samsung BN59-00599A Remote Control to Bush tV

The TV code for the Bush BMKDVD40 for a universal remote control is 0376. You can usually find the code listed in the manual for your universal remote, or you can search for the code online by typing in the model number of your TV.

Using the model number of the TV, DLED32HDS, and replacement remote control leads to several replacement remotes for sale that will work this TV. One option is https://www.amazon.co.uk/Replacement-Remote-Control-Compatible-DLED32HDS/dp/B08H8V4S5C . Another is https://www.remotesca.com/products/replacement-rc4391p-remote-replacement-for-bush-dled32hds-dled49fhds-tv .

I hope this helps.

Cindy Wells

remote control to replace my lost bush TV remote https://electrohelponline.blogspot.ca/ http://www.remotecodelist.com/ Codes for Universal Remotes How to Program Universal Remote

It will be very difficult to get a universal remote control for this set. You have to contact the authorized service center for Bush at your town, to buy a new original remote control.

universal codes for a bush lcd https://electrohelponline.blogspot.ca/ http://www.remotecodelist.com/ Codes for Universal Remotes How to Program Universal Remote

Hi
If there is a "Menu" button on the front panel of your TV, you can enter into its menu; surf trough and come towards tuning option. If there is no such button on the front panel of your TV, you have to buy one universal remote control to work with it. Be sure that buying new remote have setup codes for Bush TV. There are very rare remote models have setup codes for Bush Tv. Look at its manual before buying it. OK.

The following is an extract from the Bush DFTA13HD/ DFTA13HDSIL user manual, page 9;

1. Press STUDY key until Red LED remains lit (for about 3 seconds)
2. Point Converter (Bush) remote control to TV remote control directly, keep the distance about 1~3cm
3. Press the "Power" key at TV/s remote control to send signal to Converter remote control. The LED light will flash till steady. Then press "Power" key at Converter remote control. It will record the signal.
4. Now the Power key can turn on/off TV/s power
5. Repeat settings of learning for the other keys
You can repeat Step 3-4 for setting of learning for the other keys at TV remote control, such as VOL /-, CH /-, and F1, F2 are reserved for any other keys you want to set up.

Note:
1. When you have finished setting the learning keys, press the STUDY key to leave the learning status, and the LED light will turn off.
2. The learning function of this remote control may not support all types of TV sets, if you still can not control your TV after you have attempted the above steps, then this remote control may not support your TV or its remote control.

Found the correct code for my TV & Sky remote... I searched a fair bit more on google for... "WS6680SIL/C7 code" and found... http://www.sjstv.co.uk/skycodelistNEW.html which the correct code for my Bush TV - 0742. Others you may want to try are Bush 0157 246, 263, 377, 037, 064, 065, 310,300,383, 399, 391, 402, 339. or Beko 0125 514, 398. Further, Alba Group are the firm whom own Bush brand amongst others. Google Alba Group to get their site and links to Bush sites.

The Konig IR9982 is not a universal remote control so there is no code to make it work your Bush TV. It is actually a direct replacement (electronic clone) remote for some Hitachi models.
You will need a direct replacement for your particular model, try http://www.remotesreplaced.co.uk/television/remote-control-bush.htm

i have a bush lcd tv 27 inch an its stuck on stand by i have an urc7740 one forall remote how can i take my tv of stand by with this remote.