Belkin router: 2.4ghz not working - Belkin Play N600 Wireless Dual Band Router (722868807453)

With the power on hold down the power button for 7 seconds and it will factory reset the router. Should have success using this, if not it means the hardware for the wireless component is faulty or broken.

press red reset button in back for 2 minutes.

Go to Belkin Support --->BS.

Its not necessary to purchase a new router. Nintendo DS supports WEP encryption. You wont be able to connect if the encryption on the router is WPA. Your computer can connect on both WPA and WEP so what i suggest is for you to access the router page then check the wireless settings then change the encryption to WEP so that your Laptop and DS can connect at the same time. To access your router check the manual for the username and password


Thanks for using Fixya.

You can change the channel used by the phone in the settings, but the better option is to make sure the charger base is nowhere near the microware.

Also, make sure that the microwave and the charger base are NOT plugged into the same outlet. I would even try a different outlet than you are using now as interference would definitely pass through the line.

Well you can try to contact to belkin tech support and ask for online assitance hope they will fix your problem and you will be good to go.

the red light means u havent got a connection if u have installed properly try upgrading the firmware the problem might be the routers
http://www.belkin.com/support/product/?lid=en&pid=F5D9230-4&scid=221