20 Most Recent Belkin USB PDA Adapter (F5U109EA) Serial Adapter Questions & Answers


Sure there is. This amazing tool driverupdate us will keep every single driver up to date like no other program (from personal experience). Take a look and enjoy

Belkin USB PDA... | Answered on Apr 23, 2016


No, this product is not compatible with Windows 7 - 64 bit. It is compatible with Vista 32 bit computers. however u have a similar adapter which is compatible with Vista 64 bit, and Windows 7 - 64 bit you can use part F5U257 (USB-to-Serial Adapter).

Belkin USB PDA... | Answered on Aug 15, 2011


can you confirm if it is F5U409?
If so the solution would be to install windows vista drivers. in belkin site it says that windows 32bit are compatible with the adapter.

http://en-us-support.belkin.com/app/answers/detail/a_id/590/~/is-the-f5u409-usb-pda-adapter-compatible-with-vista-64-bit%3F

Belkin USB PDA... | Answered on May 10, 2011


In my effort to find answer I created a bigger issue. Answer to my Belkin issue was found at the Belkin website. But now due to my own failure to read all the details of acceptance of what I thought was what was necessary to get help; I am into another software 'pay-me' software program costing $10/month or $12+ for one time help of something which is simple to fix (Fix-ya). I got tired of paying Microsoft $25 each time to answer a simple question and often told to re-booth my entire system at 'possibe loss of my info'. When I found the answer and told them what I did to fix my pervious problem they did not credit me or pay me $25. And now there is Fix-ya; NO THANKS. Please remove me from your support group list. Not interested. JB

Belkin USB PDA... | Answered on Feb 17, 2010


Hi,

Found a driver at www.driverguide.com Register with the site, search for f5u409 and the third one down I think is the Vista driver. Hopefully should solve your problem.

Belkin USB PDA... | Answered on Nov 04, 2008


A: if you want to take a risk, try bending the top of it back to it's normal position. 
B: You might want to open it up and check for internal damage. Most flash drives are held together by a screw or can be **** open with a penknife. Bend the plug back to it's normal position, and try putting it back in your computer. If your computer picks it up, copy off all the data, and buy a new flash drive!
If that doesn't work, contact a data recovery specialist in your area, and they will be able to help you! Good Luck!

Belkin USB PDA... | Answered on Aug 07, 2008


I had the same problem. I went to my Device Manager and checked the port setting for my cable. I reset the port in advanced properties and I was then able to do a transfer. I still have a yellow flag on my cable and get the error 10 but for some reason it did the transfer???

Belkin USB PDA... | Answered on Mar 02, 2008


Blue?
the n300 colors.....
4 LED Descriptions
Router Link LED
This LED indicates the connection between the extender and the router or access point.
Solid green
. Best connection.
Solid ambe
r. Good connection.
Solid red
. Poor connection.
Off
. No connection.
Device Link LED
This LED indicates the connection between the extender and a computer or mobile device.
Solid green
. Best connection.
Solid amber
. Good connection.
Solid red
. Poor connection.
Off
. No connection.

Power LED
Solid amber
. The extender is booting.
Solid green
. The extender is powered on.
Off
. The extender is powered off.
WPS LED
Solid green
. WiFi security is enabled (WPA or WPA2).
Blinking green
. A WPS connection is being established.
Off
. WiFi security is not enabled.
Note:
If the Router Link LED or Device Link LED is amber or red, Find the Best Location

Belkin Computers... | Answered on May 06, 2019


Start - Settings - Add Remove Software. Highlight Belkin, click Uninstall.

Belkin Computers... | Answered on Apr 29, 2019


Installing a Belkin extender is Quite Easy With Right Guidance. As you know Extender will help you boost your network strength. Who has an Older Belkin extender Please Reset it Before you go For Installation. Reset Will Also help you to Troubleshoot the Belkin extender Problems & Allows you to make changes to it. After Reset of your extender, You can Setup Belkin extender as you wish. just visit https://bit.ly/2WM0Hik

Belkin Computers... | Answered on Apr 20, 2019


An idea of Belkin router is blinking orange is simple but there can be many more reason behind that light code.
1. it just can be ISP issue (may be internet service provider is down )
2. you might want to restart the modem then router and wait for like 1 min this Belkin router blinking orange to green.
to know more visit
https://fixingblog.com/why-belkin-router-is-blinking-orange-and-not-working/

Belkin Computers... | Answered on Apr 15, 2019


Using the reset button The location of your range extender's reset button will vary depending on its model. The reset begins once you press and hold thereset button for at least 10 seconds while the range extender is powered ON. The Status Light on the the range extender will momentarily flash and will then begin to blink. When the light becomes solid again, the reset is complete.
Using the web-based setup page
If using the physical button does not work, you can access the range extender's web-based setup page and do the reset from there. Before you begin:
  • Make sure that the wireless computer or device you're using to access the web-based setup page is connected to the same network as the range extender.
  • You need to identify the IP address that your router has assigned to your range extender. Locate this by accessing your router's DHCP Client table. Once you have the range extender's assigned IP address, use it to access your range extender's web-based setup page.
  • Alternatively, you can enter "http://192.168.206.1" in the web browser's Address bar if your range extender has NOT detected a DHCP server in your network.
Step 1:
In the web-based setup page of the range extender, go to Utilities and select Restore Factory Defaults. QUICK TIP: You may be prompted to log in with your range extender's administrator password. If you have not set any, simply leave the field blank and click on Submit. Step 2:
Click on the Restore Factory Defaults button. Your Belkin range extender should now be restored to its factory default settings.

Belkin Computers... | Answered on Feb 16, 2019


There is a physical issue with the connections inside of your keyboard. The C and the D keys are on the same data line and the C is getting triggered when you press the D key.

Belkin Computers... | Answered on Jan 08, 2019


Hi, I was also suffering from this type of problems .when i visit this site .my problems has been solved. You can also visit this url to solve your problems.
Thanks!
Belkin Range Extender Won Connect to Wireless Router TechVaidya

Belkin Computers... | Answered on Dec 04, 2018

Not finding what you are looking for?
Belkin USB PDA Adapter (F5U109EA) Serial Adapter Logo

16 questions posted

Ask a Question

Usually answered in minutes!

Top Belkin Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2276 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Pamela Bates
Pamela Bates

Level 2 Expert

149 Answers

Are you a Belkin Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Belkin Computers & Internet

  • Belkin Computers & Internet

Most Popular Question

windows 7 driver belkin f5u109

  • Computers & Internet
Loading...