Don't know how to work the Blomberg Digitonic Washing Machine

All the transit bolts do is fix the drum in place. If you ran the machine, all that would happen is that it would try to jump around during spin. The groan, sounds like a bearing is seized or the motor is defective.

https://www.google.com/search?q=Blomberg+washer+repair+near+me

..

This look as though it miht help:

http://www.retrevo.com/support/Blomberg-WAF-1300-Washers-manual/id/20095dj595/t/2/

Hi I just bought a second hand THOR TWM800 washing MACHINE, anyone knows which setting i should have the dial on to have a simple wash and dry clothes? Machine washes but doesn't dry.

We found a way to reset the computer and solved the problem.
1. Press and hold pause turn off machine and turn back on holding pause all the while.
2. This should reset the computer. All lights will light up on LCD display.
3. Release pause button. Turn off machine, turn back on and begin a new wash cycle.
woo hoo!

Type your washing machine name into the Google search box and scroll down the list of 'hits'. You'll see your washing machine instruction booklet offered for free as a PDF which you can download in a couple of seconds.

This video will show you how to change the pump washing machine
Please remember to subscribe to our YouTube channel for all appliance tutorials
a 4 THUMBS rating is appreciated for answering your FREE question.
And don't forget to like us on facebook

I have Blomberg WM87120 NBL00 Product code 717518110 and had flashing Lock in display. Bought and installed new lock and no change. Display still flashing lock. Used following procedure and every is working now.
Press pause button and hold down while turning off machine.Continue to hold pause button and turn power back on. If numbers come up on display make note of them for future reference. Release pause button and all lights on display will light up. Turn power off again and then turn back on. If machine was in a cycle it should end it and then return to normal operation. .Dont know if new lock made a difference. Try the reset procedure first.

you cannot reset it anyway its NOT that, you have a door sensor fault most likely or a MCU problem look get a service manual and follow that.

Hello, first check if the breaker triped in the electrical panel box (fuse box--old name). If it has not triped a breaker. Unplug your washing machine and wait about 10 or 15 second and replug the washing machine into the electrical socket. Don't turn it on. There should be a reset button. Push the button first, then turn on your washing machine. I hope this works for you. GB...stewbison.

Hello & Welcome to FixYa

I don't think it has to do with any sort of belt instead it seems that something is stuck under agitator or the agitator needs replacement. You can view this video if you want to replace it yourself:

Please get back to me if you have any other questions.

Kevin