Question about Samsung DLP HL-P5663W 56" TV

2 Answers

No picture and tv turns itself off

If it is the lamp where do I find it

Posted by on

  • heyjude747 Jan 13, 2009

    Problem is solved, now how do I take off the fix ya sight?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Found the lamp and got a new one........problem solved.

Posted on Jan 13, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 240 Answers

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have a Samsung HLR5067Wax, I replaced the bulb, however when the TV turns on the picture is distorted and pixelated. What can cause this?


U recheck all the input and output wires connections take out and put back in for the replacement of the projection lamp?The tv colors wheel might be also dead too.Picture now,flashes colors or black&white within the picture itself?Any humming or motor noises,any these causes are the colors wheel is dying,require replacement of the tv colors wheel.

Dec 15, 2010 | Samsung DLP HL-P5663W 56" TV

1 Answer

I have a Samsung HL-R5678W DLP TV that is acting up. When I first turn it on everything works, after 5 minutes it shuts itself off. After 2 minutes it will come back on without sound. It will do this a...


U turn tv on hear any squiling,grinding or motor noises?Picture show up before it shut down picture have flashes of black&white within the picture?Yes,to all of these,this tv have a colors wheel and it dead,require the colors wheel replacing.No,none of these problems.The tv projection lamp,if in this tv like a 1 1/2 or 2 years,tv ben on an watches like 4 or 5 hours a day?The "LAMP" LED light indication lite up or flahes,the projection lamp life is over.Require a new projection lamp.

Oct 22, 2010 | Samsung DLP HL-P5663W 56" TV

1 Answer

Samsung DLP turns on and off - cycle repeats


make sure put the lamp door back before trying to turn it on because they have switches on them that allow the tv to turn on. If that is ok you probably have a bad ballast.
Call a local tv repair shop to further diagnose the problem.

Dec 10, 2009 | Samsung DLP HL-P5663W 56" TV

1 Answer

My Samsung DLP hln567w tv has NO picture on all


If the Lamp ignites and stays lit, but screen is completely black, not even the on screen display, then it is likely a bad DMD board.

If the lamp ignites and then turns off after a couple seconds then it is likely the color wheel is seized.

If the lamp never fires, but the TV clicks a bunch of times, then it could be a bad Ballast or the Lamp itself.

Sep 18, 2009 | Samsung DLP HL-P5663W 56" TV

1 Answer

Watching tv when the picture went black and now the green on light flashes for 30 times and turns off


A green flashing light for this model of TV indicates that the lamp cover is open on the TV.
  1. Unplug the power cable to the TV.
  2. Remove the 2 retaining screws on the lamp cover with a Phillips type screwdriver.
  3. Remove the lamp door completely from the TV.
  4. Remove the two retaining screws on the lamp case.
  5. Lift up the fixed wire handle of the lamp.
  6. Pull out the handle slowly and remove the lamp case.
  7. Insert the new lamp gently into the correct position. Make sure it is inserted correctly.
  8. Using a manual Phillips screwdriver (Do Not use an electric screwdiver), tighten the screws you removed in
    step 3.
  9. Replace the lamp cover and tighten the cover screws.
  10. Plug in the power cord and turn on the TV. After the initial warmup period (which may take up to several
    seconds for full picture brightness), the TV should operate normally.
If any of the following conditions exist, turn off the TV, unplug the power cord, and repeat steps 1–9 to ensure that the lamp unit and lamp unit
door are installed correctly:
  • The lamp indicator flashes green.
  • No picture
  • Dark picture
  • TV will not turn on
If, after repeating steps 1–10, the problem still exists, call Customer Service at 1-800-631-3811.
Source

Aug 31, 2009 | Toshiba 44NHM84 44" TV

1 Answer

Sony TV not turning on!


u need to change the lamp...same thing happened to me then i bought a lamp on ebay for $75n replaced it n now it works fine

May 28, 2009 | Sony FD Trinitron WEGA KV-36HS500 36" TV

1 Answer

Samsung DLP TV has lot picture. Makes a Humming sound


That sounds most like the color wheel,
to change that you need to have some skill in electronics, I would recommend to take it to a shop

Apr 25, 2009 | Samsung DLP HL-P5663W 56" TV

2 Answers

Samsung HLS4266W 43" dlp


Power issues (Tv not turning on) were typically due to faulty ballast. While the TV reports a bad lamp it is the ballast itself causing the issue. Samsung is well aware and will replace both the ballast and the lamp (since the lamp can be prematurely aged but the bad ballast). After replacment most people stop having issues.

Dec 24, 2007 | Samsung DLP HL-P5663W 56" TV

2 Answers

Samsung hln567w dlp tv


after 3 years it is a good chance that the lamp is going,,however if it plays its melody when it turns off there is a possibility thateither the lamp door switch or the thermostat are failinf

Nov 28, 2007 | Samsung DLP HL-P5663W 56" TV

Not finding what you are looking for?
Samsung DLP HL-P5663W 56" TV Logo

Related Topics:

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

68352 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Are you a Samsung Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...