TRV285 E, Insert cassette msg is appearing

Der Fehlercode C:31:40 bei Sony Camcordern deutet auf ein Problem mit dem Motor des Kassettenfachs hin. Es kann sein, dass der Motor blockiert ist oder dass es ein Problem mit den Sensoren gibt, die den Status des Kassettenfachs ?berwachen. Um das Problem zu beheben, k?nnen Sie folgende Schritte ausprobieren:

1. Entfernen Sie die Batterie und das Netzkabel des Camcorders und lassen Sie das Ger?t f?r einige Minuten ausgeschaltet.
2. ?berpr?fen Sie das Kassettenfach auf lose Teile oder Fremdk?rper, die m?glicherweise blockieren k?nnten.
3. Versuchen Sie, das Kassettenfach vorsichtig zu schlie?en und zu ?ffnen, um zu sehen, ob dies das Problem l?st.
4. Wenn das Problem weiterhin besteht, k?nnen Sie versuchen, das Kassettenfach mit Druckluft zu reinigen, um m?gliche Blockaden zu entfernen.
5. Wenn alle diese Schritte fehlschlagen, kann es ein mechanisches oder elektronisches Problem sein, das eine Reparatur durch einen qualifizierten Techniker erfordert.

Es ist auch m?glich, dass das Problem durch eine defekte Cassette verursacht wird. Wenn m?glich, versuchen Sie, eine andere Cassette auszuprobieren, um zu sehen, ob dies das Problem l?st. Wenn das Problem weiterhin besteht, liegt es h?chstwahrscheinlich am Camcorder selbst.

It is possible that your Epson WF-7820 is experiencing a paper jam or a misalignment of the paper cassette. If the paper cassette is not correctly inserted into the printer, the printer will display an error message that tells you to insert the cassette correctly. To resolve this issue, make sure the paper cassette is correctly inserted and that any paper jams are cleared. If the issue persists, try resetting the printer by unplugging it and then plugging it back in. If the error message still appears, contact Epson support for further assistance.
Loading Paper in Cassette 1 (Upper Cassette)
https://files.support.epson.com/docid/cpd3/cpd39348/Source/Printers/Source/Paper_Loading/Tasks/XP800/loading_paper_upper_xp800.htmlfaq-207896 ' SPT_C11CB58201 ' Epson WorkForce WF-7520 ...
https://epson.com/faq/SPT_C11CB58201~faq-207896?faq_cat=faq-topFaqsWF-3820 Series User's Guide
https://files.support.epson.com/docid/cpd5/cpd58812.pdf

i have i want to tranfer my video record programme to my computer, but nor show

Hi,
It seems that your cassette holding alignment has been disturb... Since Sony does not provide service manual, at home we can try our luck only....
Check out this, while inserting cassette analyse that which side of cassette is stucking and try to figure out causes for the same, that means check whether there is any displacement has taken place....

A malfunction other than the above that you can service has occurred.

• Eject the cassette and insert it again, then operate your camcorder.
• Disconnect the power cord of the AC Adapter or remove the battery pack. After reconnecting the power source, operate your camcorder

This camcorder is eleven years old - it may just be worn out.

Follow these steps to resolve the issue:

Step 1: Remove the cassette and insert it again , then operate your Camcorder.

Step 2: Try using different cassette.

Step 3: Try resetting the Camcorder.

[Resetting the Camcorder will reset the settings of the Camcorder to the factory settings including date and time. It will not delete any data saved in the Camcorder.]

Please locate the RESET button behind the LCD screen of the Camcorder. Press the RESET button using a sharp-pointed object. The Camcorder should be switched ON when you reset the unit.

Step 4: Try to power reset the Camcorder and check if it helps to resolve the issue. Power Reset the Camcorder by removing the batteries from the Camcorder and inserting it after 1 minute.

Step 5: Service is required.


http://www.kb.sony.com/selfservice/documentLink.do?externalId=C79466

After not using my camera (Sony HVR-V1U) for one week, I took it out for an assignment but the error keeps coming up C:31:40 asking me to eject the cassette. The camera never gave me problems before this.I have tried smacking it at the bottom with the flat of my hand, flowing it with a hair dryer, shaking it, opening the cassette door for hours but nothing seems to work. The sony technician says I may have to send it in for repairs can any one help before I have to resort to this?

I also have this problem, with a SONY DCR-TRV480E PAL. The problem is when I insert the cassette it reads on screen that "re-insert the cassette"

Turn the unit off and hit the back of the camera twice near the battery compartment with the palm of your hand. Sounds crazy but it worked with my camcorder Sony DCR-TRV480. Problem started when I used 8MM Head Cleaner. I think the roller got stuck inside camcorder. The trouble code came up C:31:22. Hope this helps.