SHARP Nicam IGR Teletext 29B S5 how old isit?

the web began to take over some of the functions of teletext from the late 1990s, and many broadcasters have ceased broadcast of teletext-CNN in 2006 and the BBC in 2012. The decline of teletext has been hastened by the introduction of digital television, though an aspect of teletext continues in closed caption .

you should press the home button of your teletext page usually its 100
or you could press one of the four colored buttons o your remote control unit so it will reset to the home page of the teletext
(a black page mostly says that teletext isn't available to the specific channel )

looks like stc fiting ic leaking at the oil injection pump
igr??? probably ipr valve same area removed cover
on right side vale cover removed icp sesor get adapter
and apply 100psi plus of air presure with igniton power
at ipr valve and look or listen for leek before removing air
power out ignition feed or it will spray back unless leek is
fairly larged

Press CC button on the remote control until you see CC/TT OFF.
Closed Captioning or TeleText is the cause of the problem.

go into your cutomer menu and trun off close caption

It could be the NICAM Module that`s packed in, Try switching it to Mono. Ian

try go to menu programmed by using a remote control ,and find the picture setting ,like a ntsc.pal,secam,nicam, try choose them it will fit the color.

that means tht u have a faulty stage, probably it's the vertical, and or Xray protection kickin in.
U have to trouble shoot

Hi Yabby,

If the dots are very narrow and jump about and you're receiving an analogue signal it could be teletext information. This is normal but is usually hidden off the top of the screen. You need to adjust the picture height to take them off the top.

Regards

Andy