SHARP MX-3100N CODE E7-06 - SHARP MX-3100N

https://printcopy.info/?mod=erc&brand=Sharp&model=MX3100N&code=C1-14

https://elektrotanya.com/sharp_mx-2600_mx-3100.pdf/download.html

Hello Tijjani,
The error code that you are experiencing is as follows;
F2 73 IMPROPER TONER CARTRIDGE DETECTION (YELLOW)
You need to replace the yellow cartridge with the proper part # Item Number: MX 31NTYA, MX31NTYA.

Good Luck!
Rich Lilja

Developer unit is not detected , or developer is depleted ( which is very bad , because it could mean that it spilled inside your copier , it is very abrasive)

try removing and re-installing the developer unit , and maybe try using another unit for control,
could also be your harness, see if plug of developer unit is plugged into mainbord

Sounds like PJL = Printer Job Language Set source Color Convert. whatever that means !!!!
Sounds basic but have you checked the Manual ? http://www.manualsprinter.com/sharp-mx-3100n

Go through sending test prints and go from there.

This is a scheduled maintenance programmed into all of these machines. It pops up when the machine crosses a certain "milage." If your machine is still making nice copies and prints it's nothing to worry about.


Copier Collin Houston TX Copier and Imaging Expert

image cartridge cyan need to be replaced

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Which windows platform.

First check with a new yellow drum.

On the control Panel, press the keys #*C* (pound, star,clear,star)to enter test mode. Enter number 16 and press the copy button. On the touch screen press "execute" and "yes". Press CA to reboot. The error code should clear.

HI,
this will help you out...
http://www.afoffice.com/sharperrorcodes.htm


thank you,
vijay(vote for me)