Whirlpool Ultimate Care II LSQ9564J Top Load Washer "washer fills half water" Questions

half by hand. Then tried to empty and washer and it emptied fine. Tried to fill again, and it wouldn't stop filling. About a month ago, washer wouldn't agitate or empty, so I removed half the clothes,

top load washer only fills up half way Whirlpool ultimate care II GSQ9669LGO top load washer only fills up half way BAD WATER LEVEL SWITCH

...washer.I know in the owners manual it says it fills by sencing the load but im just not satisfied with how much it fills. I want more water in the wash an rinse cycles.Is there an adjustment I can ...

washer never fills up with water, almost half of the spindle height. I have check the water hoses and they are turned all the way up. its the fill up valve pipe blocked up with gunk,, this valve stops

washer fills up only half way but water keeps trying to fill tub My admiral washer will fill up on 1/2 the way full but water is still on as if it is trying to fill. So, the water keeps going and ...

...washer will only fill half way and then begin washing. On a small load setting it fills a quarter of the way. you may have to adjust/replace the water level switch. it is located behind the control ...

...washer got stuck half way before program is finished The washer got stuck half way before program "D" and the filter underneeth is filled with water the whole filter. The filters are clean I have ...

What keeps Washer to keeps filling The washer keeps filling with water, it is over half way up on the door bad board or bad pressure switch or related tubing is not sensing the water level properly.

Washer Tub Fills With Water When Washer is Not On My Kenmore has been working fine for over 1 year. Now, when the washer is idle and not in use, the tub fills with water and gone unnoticed overnight, ...

washer started to chatter during the water fill process so it was half working and half not.  But the nF gave it away and I cleaned the inlet debris out of the inlet valve and it now works.